AIWA XH-A1000 Operating Instructions - Page 17
Basic Operations
View all AIWA XH-A1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
TAPE PLAYBACK BASIC OPERATIONS REV MODE DOLBY NR zTAPE OPEN/ CLOSE Cassette tray TAPE a s f,g jl To stop play, press s. To pause play, press a. To resume play, press again. To fast forward or rewind, press f or g. Then press s to stop the tape. Types of tape Use Type I (normal), Type II (high/CrO2) or Type IV (metal) tapes for playback. To select a reverse mode Each time REV MODE is pressed, the reverse mode changes. ]P [ [ 1 Press DOLBY NR to turn Dolby NR on or off to match the playback tape. hNR For tapes recorded with DOLBY NR, turn on hNR. For tapes recorded without DOLBY NR, turn off hNR. 2 Press TAPE and press zTAPE OPEN/CLOSE to open the cassette tray. Cassette tape zTAPE OPEN/CLOSE Load a tape with the exposed side facing the unit, and the side to be played back facing upward. 3 Press zTAPE OPEN/CLOSE to close the cassette tray. 4 Press d to start play. To play the opposite side of the tape, press d again. Playback side indicator The tape counter indicates the tape running length. To play one side only, select p. To play from the side facing upward to the opposite side once only, select . To play both sides repeatedly, select ]. To start play when the power is off (Direct Play Function) When a tape is loaded, press TAPE. The power is turned on and playback begins. When zTAPE OPEN/CLOSE is pressed, the power is also turned on. To set the tape counter to "0000" Press sCLEAR in stop mode. The counter is also set to "0000" when the cassette tray is opened. MUSIC SENSOR If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily. When the x indicator of d is flashing, press f to move to the next track or g to move to the beginning of the current track. When the c indicator of d is flashing, press g to move to the next track, or f to move to the beginning of the current track. The search function may not be able to detect tracks under the following conditions: • Blanks of less than 4 seconds between tracks • Noisy blanks • Long passages of low-end sound • Low overall recording levels x: The side facing upward is being played (forward). c: The opposite side is being played (reverse). 16 ENGLISH