AIWA XH-A1000 Operating Instructions - Page 19

Random/repeat Play

Page 19 highlights

To start play when the power is off (Direct Play Function) Press CD. The power turns on and play of the loaded disc(s) begins. When z CD OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened. To check the remaining time Press CD EDIT/CHECK on the remote control during play. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, press CD EDIT/ CHECK. Selecting a track with the remote control 1 Press DISC DIRECT PLAY, then press one of the numbered buttons 1-3 within 3 seconds to select a disc. 2 Press the numbered buttons 0-9 and +10 to select a track. Example: To select the 25th track, press +10, +10 and 5. To select the 10th track, press +10 and 0. The selected track starts to play and play continues to the end of that disc. Replacing discs during play While one disc is playing, the other discs can be replaced without interrupting play. 1 Press DISC CHANGE. 2 Remove the discs and replace with other discs. 3 Press zCD OPEN/CLOSE to close the disc compartment. NOTE • When loading an 8-cm (3-inch) disc, make sure to place it onto the inner circle of the tray precisely. • Do not place more than one compact disc on one disc tray. • Do not tilt the unit with discs loaded. Doing so may cause malfunctions. • Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions. • The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. • Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction. RANDOM/REPEAT PLAY RANDOM/REPEAT Use the remote control. RANDOM PLAY All the tracks on the selected disc or all the discs can be played randomly. REPEAT PLAY A single disc or all the discs can be played repeatedly. Press RANDOM/REPEAT. Each time it is pressed, the function can be selected cyclically. RANDOM play - The line around RANDOM lights up on the display. REPEAT play - " lights up on the display. RANDOM/REPEAT play - The line around RANDOM and " light up on the display. Cancel - The line around RANDOM and " disappear from the display. To play all discs, press d to start play. To play a single disc, press DISC DIRECT PLAY, then press one of the numbered buttons 1-3 within 3 seconds to start play. NOTE • During random play, it is not possible to skip to the previously played track with f or MULTI JOG. • Random play is canceled when the numbered button is pressed to select a track. 18 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101

18
ENGLISH
To start play when the power is off (Direct Play Function)
Press
CD
. The power turns on and play of the loaded disc(s)
begins.
When
z
CD OPEN/CLOSE
is pressed, the power is also turned
on and the disc compartment is opened.
To check the remaining time
Press
CD EDIT/CHECK
on the remote control during play. The
amount of time remaining until all tracks finish playing is
displayed. To restore the playing time display, press
CD EDIT/
CHECK
.
Selecting a track with the remote control
1
Press
DISC DIRECT PLAY
, then press one of the numbered
buttons
1
-
3
within 3 seconds to select a disc.
2
Press the numbered buttons
0
-
9
and
+10
to select a track.
Example:
To select the 25th track, press
+10
,
+10
and
5
.
To select the 10th track, press
+10
and
0
.
The selected track starts to play and play continues to the
end of that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play.
1
Press
DISC CHANGE
.
2
Remove the discs and replace with other discs.
3
Press
z
CD OPEN/CLOSE
to close the disc compartment.
NOTE
When loading an 8-cm (3-inch) disc, make sure to place it onto
the inner circle of the tray precisely.
• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
• Do not use irregular shape CDs (
example:
heart-shaped,
octagonal ones). It may result in malfunctions.
• The unit may not play a CD-R/RW disc that is recorded on
personal computers or some kinds of CD-R/RW recorders
because of differences in recording platforms.
• Do not attach any seal or label to either side (the recordable
side or the labeled side) of a CD-R/RW disc. It may cause
malfunction.
RANDOM/REPEAT PLAY
Use the remote control.
RANDOM PLAY
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT PLAY
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play
— The line around RANDOM lights up on the
display.
REPEAT play
"
lights up on the display.
RANDOM/REPEAT play
— The line around RANDOM and
"
light up on the display.
Cancel
— The line around RANDOM and
"
disappear from
the display.
T
o pla
y all discs
, press
d
to start play.
T
o pla
y a single disc
, press
DISC DIRECT PLAY
, then press
one of the numbered buttons
1
-
3
within 3 seconds to start play.
NOTE
• During random play, it is not possible to skip to the previously
played track with
f
or
MULTI JOG
.
Random play is canceled when the numbered button is pressed
to select a track.
RANDOM/REPEAT