Adaptec 1210SA User Guide - Page 62
S.M.A.R.T., LED, Enclosure Properties, Enabled, Predictive failure occurred, Blink, Unblink All
UPC - 760884154038
View all Adaptec 1210SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Using Adaptec Storage Manager - Browser Edition Type indicates how the segment is used. The first and last segments may be reserved. The controller may store the RAID signature at either the beginning or end of the drive. The end of the drive is where the capacity may be rounded down to the nearest 2 MB. If this segment is a component of an array, type indicates the array level the segment is used in. If the segment is not used in an array, and is not a reserved area, it will be shown as available. Detailed view defaults to displaying the numbers of the start and end blocks of each segment in decimal values. A drop-down list is provided to allow you to display these numbers in either hexadecimal or capacity. S.M.A.R.T. For hard disk drives that support S.M.A.R.T. predictive failure reporting, this additional tab will appear with the following entries: s Enabled-indicates if S.M.A.R.T. reporting is enabled on this device. s Predictive failure occurred-indicates if this device has reported a predictive failure. LED This tab appears on hard disk drives, and has two buttons, Blink LED and Unblink All. s Blink LED-Clicking this button will cause the activity LED of the selected drive to blink. Use this to identify the drive. The activity LED will continue to blink until you click Unblink All. s Unblink All-Clicking this button cancels the effect of the Blink LED button for all drives. Enclosure Properties Selecting an enclosure and clicking Properties will open a screen with the following tabs: General, Fans, PSU, Temperature, Devices and Speaker. 5-22