Adaptec 1210SA User Guide - Page 72
Using SATASelect, Starting and Exiting SATASelect, Using the SATASelect Menus
UPC - 760884154038
View all Adaptec 1210SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
BIOS Utilities Using SATASelect The SATASelect utility enables you to change device and controller settings without opening the system chassis or handling the card. Starting and Exiting SATASelect To start SATASelect: 1 Turn on your computer and press Ctrl+A when prompted to access the ARC utility. 2 If multiple controllers are installed, select the controller you want to configure and press Enter. 3 From the ARC menu, select SATASelect. The Controller Configuration and SATA Configuration menu options are displayed. To exit SATASelect, press Esc until a message prompts you to exit. (If you changed any settings, you are prompted to save the changes before you exit.) Choose Yes to exit and reboot the system. Any changes you made take effect after the system boots. Using the SATASelect Menus To select a SATASelect menu option, use the arrow keys to move the cursor and press Enter. A-7