Alpine CDE-W265BT Owner's Manual (english) - Page 12

4 Press  or  to tune in the desired station. Holding down  or  will change the frequency continuously. Presetting Stations Manually RBDS  CDE-W265BT While receiving the station that you want to store, press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The display shows the band, preset number and station frequency memorized. Notes • A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM). • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. Presetting Stations Automatically 1 Press OBAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNEA.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1. Note • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. /ENTER/OPTION Rotary encoder  CDE-164BT /ENTER/OPTION Rotary encoder Tuning to Preset Stations Select the band, and then press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. Frequency Search Function You can search for a radio station by its frequency. 1 Press ENTER in Radio mode to activate Frequency search mode. 2 Turn the Rotary encoder to select the desired frequency. 3 Press ENTER to receive the selected frequency. Note • Press t in the search mode to cancel. Or, the search mode will be canceled if no operation is performed for 60 seconds. The RBDS (Radio Broadcast Data System) is a radio information system. PTY (Program Type) Tuning 1 Press and hold ENTEROPTION for at least 2 seconds while the unit is in Radio (FM receiving) mode. 2 Turn the Rotary encoder to select PTY SELECT, and then press ENTER. 3 Turn the Rotary encoder to choose the desired program type while the PTY (program type) is being displayed. 4 Press ENTER after selecting the program type to start searching for a station in the selected program type. The chosen program type display blinks during searching and lights when a station is found. If no PTY station is found, "NO PTY" will be displayed for 5 seconds. 12-EN