Alpine CDE-W265BT Owner's Manual (english) - Page 28

Setting the AUX NAME mode You can change the AUX NAME display in the SETUP mode.  Setting item: AUX NAME Setting contents: AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME Turning Mute Mode On/Off (INT MUTE) If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. Make sure the Audio Interrupt In Lead (Pink/Black) is connected to the terminal where the voltage becomes 0 V (GND) when a sound from External Unit is input into AUX. Otherwise, this function may not operate. For details, refer to "Connections" on page 58.  Setting item: INT MUTE Setting contents: OFF AUX (Initial setting) / ON OFF AUX: When the interrupt signal is received from device, the AUX source volume will be output from the unit. ON: When the interrupt signal is received from device, no sound will be output. Playing MP3/WMA Data (PLAY MODE) This unit can play back CDs containing both CD and MP3/WMA data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can choose to play back the CD data session only. When a disc contains both CD and MP3/WMA data, playback starts from the CD data portion of the disc.  Setting item: PLAY MODE Setting contents: CD-DA / CDDA/MP3 (Initial setting) CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3/WMA files in mixed mode, and multi-session discs can be played back. Note • Perform this setting before inserting a disc. If a disc has already been inserted, remove it. Setting the stay on mode You can set the delay in turning OFF the unit's power after the vehicle's ignition is turned off (ACC OFF). When you select a mode other than OFF, the music will be paused after you turn the ignition key off (ACC OFF). At the same time, the prompt "PRESS PRESET 6 TO STAY ON" will scroll once. Press 6 within 15 seconds to continue enjoying music for the selected period. If 6 is not pressed, the unit will power off within 15 seconds. During this period, you can only receive a call by operating a paired Smartphone.  Setting item: STAY ON Setting contents: OFF (Initial setting) / 5 MIN / 15 MIN / 30 MIN Notes • Note that there is a possibility that the battery may be drained if already weak, during this period. • The setting result of STAY ON will be cleared if you switch the 2WAY/ 3WAY system mode. 28-EN Demonstration This unit has a demonstration mode to display its various functions.  Setting item: DEMO MODE Setting contents: ON (Initial setting) / STANDBY / OFF ON: The unit starts the demonstration if there is no operation for 30 seconds. STANDBY: Quit the demonstration mode. Note that if this unit is disconnected from the vehicle's battery, the next time you use this unit the DEMO mode will be ON. OFF: Quit the demonstration mode completely. Display Setting DISPLAY is selected on the setup main menu in step 2. Changing Lighting Color You can change the lighting color of the unit's keys/display.  Setting item: ILLUMINATI  Further setting items: KEY & DISP( Key & Display ) / KEY ( Key ) / DISP* ( Display ) Setting contents: OPTION / CUSTOMIZE OPTION: A total of 30 colors can be selected. CUSTOMIZE: If there is no color you prefer in OPTION, you can customize the color as follows. * You can change the lighting colour of keys and display simultaneously or respectively by selecting KEY&DISP or KEY/ DISP. 1 After entering CUSTOMIZE, turn the Rotary encoder to select a color (RED, GREEN, BLUE) you want to adjust, and then press ENTER. 2 The adjusted color will blink, turn the Rotary encoder to select a value (0-60). R is red, G is green and B is blue. 3 Press ENTER or t to finish the color setting. 4 Repeat steps 1 to 3 to set another color. Notes • In step 2, you can switch to another color setting mode by pressing  or . • The setting values in OPTION mode and CUSTOMIZE mode are linked, when the setting value in CUSTOMIZE is different from the one in OPTION, "USER" will be displayed in OPTION mode. • During CUSTOMIZE setting, at least one setting value should be greater than 20.