Alpine CDE-W265BT Owner's Manual (english) - Page 46

Setting the Parental Control The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels. You can unlock a channel or change the passcode using this menu option.  Setting item: P-LOCK Setting contents: CLEAR ALL / LOCKED CH / EDIT CODE How to input passcode? 1 After select P-LOCK, a passcode input screen will be displayed. 2 Input the passcode using the Rotary encoder. The initial default 4-digit passcode is set to 0000. The passcode is entered one digit at a time with the Rotary encoder. For example, by turning to clockwise 2 steps, the number 1 is selected. After entering the digit, it is displayed as "l" (asterisk). 3 Press , and then input the next digit of the passcode as described in step 2. 4 Repeat steps 2 to 3 until the 4 digits of the passcode are entered, and then press ENTER. After the correct passcode is entered, the CLEAR ALL/LOCKED CH/EDIT CODE items can be selected. CLEAR ALL: Unlock all locked channels. Turn the Rotary encoder to select CLEAR ALL YES, and then press ENTER. LOCKED CH: After selecting this item, turn the Rotary encoder to select a channel from channel list, press ENTER to select to lock or unlock the channel. Locked channels cannot be tuned without entering the passcode. The locked channel will be displayed with an "L" before the channel No. EDIT CODE: Change the passcode. 1 Input the old passcode as described in steps 1 to 4 in "How to input passcode?". After the old passcode is entered, the new passcode input screen will be displayed. 2 Input the new passcode as described in steps 1 to 4 in "How to input passcode?". A confirm screen (CONFIRM) will be displayed and the new passcode must be entered again for confirmation. When the passcode is changed successfully, the unit will display CODE SAVED. Note • Keep a note of the numbers somewhere safe in case you should forget it. Confirming the strength of the SiriusXM signal You can check the signal strength through this setting item.  Setting item: SIGNAL IND Setting content: SIGNAL IND SIGNAL IND: This menu item displays the SiriusXM signal strength as STRONG, GOOD, WEAK or NO SIGNAL. Note • If the Signal Indicator reports Weak or No Signal and your vehicle is parked outside with no obstructions to the southern sky, then your SiriusXM antenna may not be properly installed or may have become damaged. Setting TuneStart™ With the TuneStart™ feature turned ON, you will hear the beginning of the song when you tune to one of your Preset music channels from the current band of presets. It may take a minute or two for the feature to work after power up or after changing preset bands.  Setting item: TUNE START Setting contents: OFF / ON (Initial setting) OFF: When set to OFF, TuneStart™ mode is unavailable. ON: When ON, selecting a SmartFavorites or Preset Channel will automatically start the currently song from the beginning, depending on the channel content type. Pressing r will return to live satellite radio. Note • Displayed only when SiriusXM Tuner-SXV200 or later is connected. Checking the SiriusXM Radio ID Number The SiriusXM Radio ID is required for activation and can be found by tuning to Channel 0 as well as by looking on the label found on the SiriusXM Connect tuner and its' packaging. The Radio ID does not include the letters I, O, S or F. 1 While in the Satellite Radio Mode, press  or  to select channel "0". The unit displays "RADIO ID" and ID number at the same time. 2 To cancel the ID number display, select a channel other than "0". Storing Channel Presets 1 Press OBAND to select the desired band you want to store the preset in. There are 3 Satellite Radio Preset bands. Each press of OBAND changes the band: SXM1  SXM2  SXM3  SXM1 46-EN