Alpine CDE-W265BT Owner's Manual (english) - Page 17

Note • If no operation is performed for 5 seconds, the unit automatically returns to normal mode. 2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting DEFEAT ON, previously adjusted level settings of BASS and TREBLE will return to the factory defaults. Sound Setting You can flexibly customize the unit to suit your own preference and usage. From the AUDIO SETUP menu, Audio Setting can be modified. Use steps 1 to 5 to select the category you wish to modify. For details on how to change each setting, see the following sections below. 1 Press and hold YSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select AUDIO, and then press ENTER. 3 Turn the Rotary encoder to select the desired sound setting menu, and then press ENTER. EQ PRESETS*1/*2/*3  BASS ENGIN*4/*5  PARAMETER*5/*6  9BAND P-EQ*1/*3/*7  SOURCE VOL  X-OVER*1/*3  SUBWOOFER*8  SUBW PHASE*9  SUBW SYS*3/*9  LENGTH*1  TCR*1  POWER IC  MX SETTING*1/*3  EQ PRESETS *1 Adjustment cannot be performed when DEFEAT is set to ON. *2 Any changes made to either EQ PRESETS or 9BAND P-EQ are reflected in the others' settings. *3 These items are not adjustable in BASS ENGINE SQ mode. If you want to adjust these items separately, follow the confirm message and select "YES" to exit BASS ENGINE SQ mode, then make the setting. *4 Not displayed when the Audio Setup mode is activated by pressing BASS. *5 Not displayed when 2WAY /3WAY system mode is set to 3WAY. *6 Not displayed when BASS ENGIN is set to OFF. *7 In step 3, after selecting a Band (BAND1 to BAND9) from 9BAND P-EQ adjustment mode. Turn the Rotary encoder to select the desired item, and then press ENTER to continue to step 4. *8 This item is also related to BASS ENGINE SQ mode when you adjust sound settings via the TuneIt App on a Smartphone. Refer to "Adjusting the sound via the Smartphone" on page 26. *9 These functions are inoperable when SUBWOOFER is set to OFF. 4 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select SUBWOOFER ON or SUBWOOFER OFF) 5 Press and hold YSETUP for at least 2 seconds to return to normal mode. Notes • Adjustment cannot be performed during a call. • Pressing t returns to the previous Sound menu mode. • If no operation is performed for 60 seconds, Sound menu mode is canceled. • You can access the Sound menu mode directly by pressing BASS when BASS ENGIN is set to OFF. Refer to "Setting BASS ENGINE SQ ON/ OFF" on page 17. Equalizer Presets 10 typical equalizer settings are preset at the factory for a variety of musical source material. USER settings are created in the 9BAND P-EQ mode. USER  FLAT (Initial setting) POPS  ROCK  NEWS  JAZZ  ELEC DANCE  HIP HOP  EASY LIS  COUNTRY  CLASSICAL Note • The 9-Band, Parametric EQ is used to customize the EQ PRESETS settings. Setting BASS ENGINE SQ ON/OFF This function provides a short cut for BASS ENGINE SQ setting. EQ PRESETS, 9BAND P-EQ, etc., will no longer be adjustable when ON is set.  Setting item: BASS ENGIN Setting contents: OFF (Initial setting) / ON OFF (MANUAL SET mode): Adjust each audio effect setting separately. ON (BASS ENGINE SQ mode): Adjust BASS ENGINE SQ via a short cut. Note • You can also set BASS ENGINE SQ ON/OFF directly by pressing and holding BASS. Refer to "Switching BASS ENGINE SQ mode" on page 20. Displaying the BASS ENGINE SQ PARAMETER After setting BASS ENGIN to ON, you can display the current BASS ENGINE SQ Parameter type.  Setting item: PARAMETER Displaying contents: The name of the parameter currently selected is displayed. (INITIAL / TUNEIT A ~ TUNEIT E) Adjusting the Parametric Equalizer Curve (9BAND P-EQ) You can modify the Equalizer settings to create a response curve more appealing to your personal taste. 1 After selecting a BAND (BAND1 ~ BAND9) from the 9BAND P-EQ adjustment mode, turn the Rotary encoder to select the desired setting item, and then press ENTER. CENTER FRQ  WIDTH (Q)  LEVEL  CENTER FRQ 2 Turn the Rotary encoder to select the desired setting value, and then press ENTER. 3 Press t to return to the previous step. 17-EN