Alpine CDE-W265BT Owner's Manual (english) - Page 22
About the Crossover
View all Alpine CDE-W265BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Delay Number 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 Time Difference (msec) 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 Distance (cm) 255.0 258.4 261.8 265.2 268.6 272.0 275.4 278.8 282.2 285.6 289.0 292.4 295.8 299.2 302.6 306.0 309.4 312.8 316.2 319.6 323.0 326.4 329.8 333.2 336.6 Distance (inch) 100.5 101.8 103.2 104.5 105.9 107.2 108.5 109.9 111.2 112.6 113.9 115.2 116.6 117.9 119.3 120.6 121.9 123.3 124.6 126.0 127.3 128.6 130.0 131.3 132.7 About the Crossover Crossover (X-OVER): This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. Each channel is controlled independently. Thus, each speaker pair can be driven by the frequencies for which they have been optimally designed. The crossover adjusts the HPF (high pass filter) or LPF (low pass filter) of each band, and also the slope (how fast the filter rolls off the highs or lows). Adjustments should be made according to the reproduction characteristics of the speakers. Depending on the speakers, a passive network may not be necessary. If you are unsure about this point, please consult your authorized Alpine dealer. 2WAY mode Low range speaker Rear high range speaker Front high range speaker Cut-off frequency (1/3 octave steps) HPF LPF 20 Hz ---- 200 Hz 20 Hz - 200 Hz ---- 20 Hz 200 Hz ---- Slope HPF ---- FLAT, 6, 12, 18, 24 dB/oct. FLAT, 6, 12, 18, 24 dB/oct. LPF FLAT, 6, 12, 18, 24 dB/oct. ---- ---- Level 0 to −12 dB 0 to −12 dB 0 to −12 dB Low range High range (Different from actual display) 3WAY mode Low range speaker Mid range speaker High range speaker Cut-off frequency (1/3 octave steps) HPF LPF ---- 20 Hz 800 Hz 20 Hz - 20 Hz 800 Hz 20 kHz 1 kHz - 20 kHz* ---- Slope HPF ---- FLAT, 6, 12 dB/oct. FLAT, 6, 12 dB/oct. LPF FLAT, 6, 12 dB/oct. FLAT, 6, 12 dB/oct. ---- Level 0 to −12 dB 0 to −12 dB 0 to −12 dB * Depending on the response characteristics of the speaker, care should be taken when setting the response slope of the high range speaker to FLAT in 3WAY mode, as speaker damage may result (page 23). 22-EN