Alpine TMI-M990 Owners Manual - Page 10

Getting Started About the Remote Control Notes on Using the Remote Controlmmmmmmmmmmm Point the remote control transmitter at the remote control sensor. If connected to an IONBUS compatible head unit, even if you point the remote control at the remote control sensor on the head unit, the operation is received the same way. Battery Replacement Applicable battery: Use two "AAA" sized dry batteries or equivalent. 1 Opening the battery cover. Push on the cover and slide it as indicated by the arrows then the cover will be removed. 2 Replacing the battery. Put the batteries in the case observing the polarity, as illustrated. Remote control sensor • Point the remote control at the remote sensor within about 2 meters. • It may not be possible to operate the remote control unit if the remote control sensor is exposed to direct sunlight. • The remote control is a small, light weight precision device. To avoid damage, short battery life, operational errors and poor button response, observe the following. − Do not subject to shock. − Do not put in a trouser pocket. − Keep away from food, moisture and dirt. − Do not place in direct sunlight. 3 Closing the cover. Push the cover in the arrow direction until a click is heard. Warning DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident. 6-EN