Alpine TMI-M990 Owners Manual - Page 59

Parking Brake Lead Connection If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc. 1 Vehicle Cable Pinch Connector 2 Pliers Monitor Cable Stopper Foot Brake Lead / Parking Brake Lead Connection Foot brake lamp FOOT BRAKE TMI-M990 Monitor PARKING BRAKE (Yellow/Blue) Pinch Connector Parking brake lamp Parking brake lead Battery Parking brake switch Connection Diagram of SPST Switch (Sold Separately) (If the ACC power supply is not available) SPST SW (Optional) IGNITION (Red) BATTERY (Yellow) FUSE (1A) (Optional) TMI-M990 (Monitor) FUSE (7.5A) (Optional) Battery • If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately). • The diagram and the fuse amperage shown above are in the case when TMI-M990 is used individually. • If the switched power (ignition) lead of the TMI-M990 is connected directly to the positive (+) post of the vehicle's battery, the TMI-M990 draws some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged. 55-EN Chassis (Yellow/Black) Pinch Connector Foot brake lead Foot brake switch