Alpine TMI-M990 Owners Manual - Page 17
Alpine TMI-M990 - LCD Monitor Manual
View all Alpine TMI-M990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Supplement See page 18 for supplementary information. Adjusting the Display Back and Forwards The monitor opening angle can be set in 2 positions. 1 Press and hold OPEN/CLOSE / SETUP for at least 2 seconds while the display is out. 2 Press OPEN/CLOSE / SETUP or VISUAL EQ and select SLIDE. When you press OPEN/CLOSE / SETUP, you move to the next item, press VISUAL EQ to move to the previous item. 3 Press / TILT or / TILT, and select BACK or FRONT. The display can slide about 1 cm back and forwards. 4 When you have finished adjusting, press and hold OPEN/CLOSE / SETUP for at least 2 seconds. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ • If the display stops during opening/closing, then press OPEN/ CLOSE / SETUP again. If it still does not move, then contact your Alpine dealer. Do not force the display. You may damage your TMI-M990. • The display activates using the values stored for angle adjustment and back and forward adjustment. See "Adjusting the Display Back and Forwards" (this page), and "Adjusting the Monitor Viewing Angle" (page 14). ○ ○ ○ ○ ○ ○ ○ ○ ○ 13-EN