Alpine TMI-M990 Owners Manual - Page 53
Alpine TMI-M990 - LCD Monitor Manual
View all Alpine TMI-M990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Information In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer. Screen not displayed. • Brightness control is set at the minimum position. - Adjust the Brightness control. • Temperature in the vehicle is too low. - Increase the vehicle's interior temperature to operation temperature range. • Connections to the DVD, CD player, navigation system are not securely made. - Check the connections and firmly connect. No function or display. • Vehicle's ignition is off. - If connected according to the instructions, the unit will not operate with the vehicle's ignition off. • Improper power lead connections. - Check power lead connections. • Blown fuse. - Check the fuse on the battery lead of the unit; replace with the proper value if necessary. • Internal micro-computer malfunctioned due to interference noise, etc. - Press the RESET switch with a ballpoint pen or other pointed article. Movement of displayed picture is abnormal. • Temperature in the vehicle is too high. - Allow the vehicle's interior temperature to cool. Unclear or noisy display. • Fluorescent plate is worn out. - Replace the fluorescent plate. Navigation system inoperative. • Connections to the navigation system are incorrect. - Check the connections with the navigation system and connect the cables correctly and firmly. No sound or unnatural sound. • Incorrect setting of volume control. - Readjust the controls. • Connections are not properly or securely made. - Check the connections and firmly connect. Indication HI-TEMP • Protective circuit is activated due to high temperature. - Leave the power OFF until the temperature decreases and then turn the power ON again. Unclear picture display. • Fluorescent tube is exhausted. - Replace the fluorescent tube*. * The fluorescent tube replacement is not free of charge even within the warranty period, for the tube is an article of consumption. 49-EN