Alpine TMI-M990 Owners Manual - Page 57
Alpine TMI-M990 - LCD Monitor Manual
View all Alpine TMI-M990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installation Installing the Monitor Installation Location Screw 2 Hex Nut (M5) Bolt Stud TMI-M990 Metal Mounting Strap Ground Lead Before deciding on the mounting location, check that opening and closing the display will not hamper gear shifting in that position. • Install at an angle of within 30 degrees from the horizontal. Chassis Front Frame (Included) Wider edge should face down. 1 Dashboard Mounting Sleeve (Included) Mounting Bracket (Included) TMI-M990 Reinforce the monitor unit with a metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (#) already attached to the vehicle's chassis. • For the screw marked ##, use an appropriate screw for the chosen mounting location. Screws (M4 x 3) (Included) Slide the mounting sleeve into the dashboard. Install the supplied bracket on the monitor. • Make sure to use the supplied screw (M4 x 3) to install the monitor. If you use another screw to install the monitor, it may cause a malfunction. Continued 53-EN