Alpine TMI-M990 Owners Manual - Page 22

Basic Operation Supplementary information This page includes supplementary information for pages 9 to 17. Please refer to these pages. TITLE Initial System Startup Description When reset, the stored contents are lost. Perform storage and adjustment one more time. If you reset when the display is open, then the display is automatically closed. If you reset while the display is opening, the backlight briefly lights up, but this is not a fault. Related page Page 9 Page 9 Page 9 Page 10 Page 10 Turning Power On or Off The power does not switch off by simply closing the display. The TMI-M990 stores the state before the ignition key switches off. For example, if the ignition key is switched from OFF to ON in NAVI. mode, then the NAVI. mode is activated. If OPEN/CLOSE / SETUP is pressed while the display is moving, then it stops. When it stops, press OPEN/CLOSE / SETUP again. The display automatically opens/closes depending on the status of the ignition key (engine key). For the setup operation, "Setting Automatic Opening/Closing of the Monitor", page 39. The display can be opened even when the power is off, but the power will not automatically turn on. See "Turning Power On or Off" (page 10) to turn on the power. Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal. In low ambient temperature conditions, the display may be dark for a short period of time immediately after the power is turned on. Once the LCD has warmed up, the display returns to normal. Opening/Closing the Monitor Page 12 Page 12 Page 12 Page 12 Page 12 18-EN