Alpine TMI-M990 Owners Manual - Page 49

Name External Equipment to Be Displayed (AUX) When at least one external device is connected, you can name each as you like. Setting item: NAME Setting content: AUX-1, (2, 3)/DVD/VCR/GAME/TV*1/CAMERA*2 *1 To connect with a TV unit, refer to "TV Operation" page 46. *2 CAMERA is only displayed in AUX-3 mode. Set to camera when the back camera is connected. • Can be only when AUX IN 1, 2, 3 SIG. is ON. External Input Audio Level Adjustment Setting item: INPUT GAIN Setting content: HIGH/LOW HIGH: Set external input audio level to high. LOW: Set external input audio level to low. • Can be set when AUX IN 1,2,3 SIG. ON. • Cannot be set to LOW, when the system switch is set to STANDALONE. (Refer to "About the system switch" (page 54).) Setting the S-IN Mode Setting item: S-IN SIG. Setting content: ON/OFF ON: Display S video output compatible ALPINE head unit source. OFF: Do not display S video output compatible ALPINE head unit. • Set when connecting to a S video output compatible head unit. • You cannot set to OFF when connected to an IONBUS compatible head unit. • If connected with a DVI-9990, set "Changing Video Output" on the S-VIDEO of DVI-9990. For details, refer to the DVI-9990 instructions manual. Name the S Video Input to Be Displayed (S-IN) If a S video output compatible ALPINE head unit is connected, you can attach a display name you like. Setting item: NAME Setting content: AUX/DVD/VCR/GAME/TV • Only valid when S-IN SIG. is ON. • Not displayed when changing the source. You can check the display by pressing DISP./A.MEMO on the remote control. 45-EN