Alpine TMI-M990 Owners Manual - Page 36

Other Useful Features Supplementary information This page includes supplementary information for pages 20 to 31. Please refer to these pages. TITLE Adjusting and Storing VISUAL EQTM Description Adjusting and storing of VISUAL EQ can also be made from the setup. The procedure is below. For more details, see the General Setup Operation. Operation from the main unit 1 Press and hold OPEN/CLOSE / SETUP for at least 2 seconds. 2 Press VISUAL EQ or OPEN/CLOSE / SETUP, and select an item to adjust from BRIGHT, COLOR, TINT, CONTRAST, SHARPNESS. 3 Adjust the image by pressing / TILT or / TILT. 4 When adjusting another item, repeat steps 2 and 3. 5 When the picture settings are complete, press VISUAL EQ or OPEN/CLOSE / SETUP and select V.EQ MEMORY. 6 Press / TILT or / TILT to select USER1 or USER2 mode. 7 Press V.SEL/DISP.OFF. The image adjustments are stored in the selected mode. 8 After setting, press and hold OPEN/CLOSE / SETUP for at least 2 seconds. The screen returns to the previous one. Operation from the remote control 1 Press and hold BAND/SETUP for at least 2 seconds. 2 Press or , and select an item to adjust from BRIGHT, COLOR, TINT, CONTRAST, SHARPNESS. or . 3 Adjust the image by pressing 4 When adjusting another item, repeat steps 2 and 3. 5 When the picture settings are complete, press or and select V.EQ MEMORY. or to select USER1 or USER2 mode. 6 Press 7 Press V.SEL/V.MUTE. The image adjustments are stored in the selected mode. 8 After setting, press and hold BAND/SETUP for at least 2 seconds. The screen returns to the previous one. The REAR SELECTOR function which switches the source of the rear monitor is allowed to set while driving. When using the head unit Blackout function, the main unit switches and input indicators illumination will be turned OFF. Related page Page 23 About REAR SELECTOR Blackout Mode On and Off Page 26 Page 31 32-EN