Alpine TMI-M990 Owners Manual - Page 19

Moving the Monitor to be Flat When you want to operate some function on the car (air conditioner, etc.) which is hidden by the raised monitor, use this function. The following operation is performed with the supplied remote control. 1 Press and hold /FLAT for at least 2 seconds. The monitor moves to the flat position. 2 Press and hold /FLAT again for at least 2 seconds. The monitor returns to the previous angle. • The monitor returns to the previous angle from being flat after 10 seconds. • If an excessive force is added to the monitor when the monitor is flat, putting an object on the back of the monitor for example, it may cause a malfunction. Adjusting the Volume The following operation is performed with the supplied remote control. 1 Press / VOLUME or / VOLUME to adjust the volume. Adjust the volume output to the Amplified Speaker that is connected to the AUX Audio Output (AUX OUT 1) Terminal. • The volume changes continuously if / VOLUME or • The volume can be adjusted for each source. / VOLUME is held down. When connected with an IONBUS compatible head unit: • The volume adjustment is performed at the head unit. For details, see Operating from the Head Unit "Adjusting the Volume", page 47. Supplement See page 19 for supplementary information. 15-EN