Alpine TMI-M990 Owners Manual - Page 35

Blackout Mode On and Off When Blackout mode is turned on, the display will turn off. The backlight life can be extended. The following operation is performed with the supplied remote control. 1 2 Press and hold V.SEL/V.MUTE for at least 2 seconds to start the blackout mode. By doing so the display will turn off. To cancel Blackout mode, press and hold V.SEL/V.MUTE for at least 2 seconds. • If any button on the unit is pressed during Blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. Operation can be performed with either the main unit switch or the remote control. The main unit switch operation is as follows. 1 Press and hold V.SEL/DISP.OFF for at least 2 seconds to start the blackout mode. By doing so the display will turn off. To cancel Blackout mode, press and hold V.SEL/DISP.OFF for at least 2 seconds. • If any button on the unit is pressed during Blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. 2 Supplement See page 32 for supplementary information. ○ ○ ○ • The simultaneous function can only be used when an IONBUS compatible head unit is connected. • To output the AUX, NAVI. mode sound of TMI-M990 during simultaneous operation, change the head unit source to AUX, NAVI. mode. (See Operating from the Head Unit "Switching the Source", page 47). • When the simultaneous function is active and you change the head unit source, only the audio is switched and the simultaneous function is not cleared. To clear the simultaneous function, press V.SEL/DISP.OFF on the main unit and switch the video to the same source as the audio. The simultaneous function can also be cleared by linking to when the DVI-9990 source switches. (General Setup Operation "Head Unit Linked Functions" page 42) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 31-EN