Asus DSL-N12HP users manual in English

Asus DSL-N12HP Manual

Get Asus DSL-N12HP PDF manuals and user guides View all Asus DSL-N12HP manuals
Add to My Manuals
Save this manual to your list of manuals

Asus DSL-N12HP manual content summary:

  • Asus DSL-N12HP | users manual in English - Page 1
    User Guide DSL-N12HP 300Mbps Wi-Fi ADSL Modem Router
  • Asus DSL-N12HP | users manual in English - Page 2
    "). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS"WITHOUT WARRANTY
  • Asus DSL-N12HP | users manual in English - Page 3
    modem router 1.1 Welcome 6 1.2 Package contents 6 1.3 Your ADSL modem router 7 1.4 Positioning your ADSL modem router 9 1.5 Setup Requirements 10 1.6 ADSL Modem Router Setup 34 3.2 Basic Setup 36 3.2.1 Layer 2 Interface 37 3.2.1 Layer 2 Interface 38 3.2.2 WAN Service Setup 38 3.2.3 LAN
  • Asus DSL-N12HP | users manual in English - Page 4
    55 3.2.7 Routing 58 3.3 Advanced Setup 63 3.3.1 NAT 63 3.3.2 Quality of Service (QoS 71 3.3.3 UPnP 79 3.3.4 DNS 80 3.3.5 DSL 85 3.3.6 DNS Proxy 87 3.3.7 4.2.1 Settings 110 4.2.2 System Log 113 4.2.3 Internet Time 115 4.2.4 Access Control 116 4.2.5 Update Software 119 5 Logout & Reboot 4
  • Asus DSL-N12HP | users manual in English - Page 5
    Pin Assignments Appendix C - Specifications Appendix D - SSH Client Appendix E - Connection Setup E1 Layer 2 Interfaces 132 E1.1 ATM Interfaces 132 E1.2 ETHERNET WAN Interfaces 135 PBC Method 163 Appendix G Notices ...164 ASUS Contact Information 178 Networks Global Hotline Information 179 5
  • Asus DSL-N12HP | users manual in English - Page 6
    contents DSL-N12HP Wireless Modem Router 2 detachable antennas Antenna holder Power adapter Network cable (RJ-45 cable) DSL/phone cable (RJ-11 cable) Quick Start Guide Warranty card Splitter NOTES: • If any of the items are damaged or missing, contact ASUS for technical inquiries and support. Refer
  • Asus DSL-N12HP | users manual in English - Page 7
    1.3 Your ADSL modem router DSL-N12HP 300Mbps Wi-Fi ADSL Modem Router 4. 3. 2. 1. Power LED Off: No power. Solid green: dropped due to an idle timeout, the light will remain Blue. Solid green: Modem power off, modem in bridged mode or WAN connection not present. The light will turn off when
  • Asus DSL-N12HP | users manual in English - Page 8
    Press this button to power on or off the system. Power (DC-IN) port Insert the bundled AC adapter into this port and connect your router to a power source. NOTE: Use only the adapter that came with your package. Using other adapters may damage the device. 8
  • Asus DSL-N12HP | users manual in English - Page 9
    devices connected to it, ensure that you: • Place the ADSL modem router in a centralized area for a maximum wireless coverage for the network equipment. • Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates. • To ensure the
  • Asus DSL-N12HP | users manual in English - Page 10
    to connect the network devices should not exceed 100 meters. 1.6 ADSL Modem Router Setup IMPORTANT! • Use a wired connection when setting up your ADSL modem router to avoid possible setup problems. • Before setting up your ASUS ADSL modem router, do the following: • If you are replacing an existing
  • Asus DSL-N12HP | users manual in English - Page 11
    4. 3. 2. 1. Wall Power Outlet Wall telephone outlet Splitter DSL Phone LAN Power Computer To set up your ADSL modem router via wired connection: 1. Connect one end of the RJ-11 cable to the ADSL port of your ADSL modem router, and connect the other end to the ADSL port of your splitter. 2.
  • Asus DSL-N12HP | users manual in English - Page 12
    Your ASUS Wireless ADSL Modem Router comes with an intuitive web graphical user interface (GUI) that allows you to easily configure its various features through a web browser such as Internet Explorer, Firefox, Safari, or Google Chrome. NOTE: The features may vary with different firmware versions
  • Asus DSL-N12HP | users manual in English - Page 13
    2.2 IP configuration DHCP MODE When the DSL-N12HP powers up, the onboard DHCP server will switch on. Basically , the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details. 1. Click Start > Control Panel > Network and Internet >
  • Asus DSL-N12HP | users manual in English - Page 14
    difficulty with DHCP mode, you can try static IP mode instead. STATIC IP MODE In static IP mode, you assign IP settings to your PC manually. Follow these steps to configure your PC IP address to use subnet 192.168.1.x. NOTE: The following procedure assumes you are running Windows® 7. However, the
  • Asus DSL-N12HP | users manual in English - Page 15
    1. Click Start > Control Panel > Network and Internet > Network and Sharing Center > Manage network connections. 2. Select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), then click Properties. 3. Change the IP address to the 192.168.1.x (1
  • Asus DSL-N12HP | users manual in English - Page 16
    4.2.4 Access Control. 3. You can now use the Web GUI to configure various settings of your ASUS ADSL modem router. Top command buttons QIS Information banner Navigation panel NOTE: If you are logging into the Web GUI for the first time, you will be directed to the Quick Internet Setup (QIS
  • Asus DSL-N12HP | users manual in English - Page 17
    guides you in quickly setting up your Internet connection. NOTE: When setting the Internet connection for the first time, press the Reset button on your ADSL modem router to reset it to its factory default settings. For more details, refer to the section 4.2.5 Update Software of this user manual
  • Asus DSL-N12HP | users manual in English - Page 18
    in for the first time, the Device Info page displays. 3. Click the Quick Internet Setup tab on the left side of the screen. 4. Key in the PPP username and PPP password that you obtained from your Internet Service Provider (ISP), assign the network name (SSID) and security key for your wireless
  • Asus DSL-N12HP | users manual in English - Page 19
    setup and go to the Device Info page. NOTE: Change the router password to prevent unauthorized access to your ASUS wireless router. 2.5 Connecting to your wireless network After setting up your ADSL modem router your device's user manual for more details on connecting it to your wireless network. 19
  • Asus DSL-N12HP | users manual in English - Page 20
    3 Configuring the General settings 3.1 Device Information You can reach this page by clicking on the Device Info icon located on the left side of the screen. The Device Info Summary screen displays at startup. This screen shows hardware, software, IP settings and other related information. 20
  • Asus DSL-N12HP | users manual in English - Page 21
    connection Shows the connection type Shows 802.1Q VLAN ID Shows the parameter setting value like, IPv6, IGMP, MLD, NAT, Firewall Lists the status of DSL link Shows WAN IPv4 address Shows WAN IPv6 address 21
  • Asus DSL-N12HP | users manual in English - Page 22
    3.1.2 Traffic Statistics This selection provides LAN, WAN, xTM and xDSL statistics. Click the Traffic tab to display the following. Click Reset Statistics to perform a manual update. 22
  • Asus DSL-N12HP | users manual in English - Page 23
    LAN Statistics This screen shows data traffic statistics for each LAN interface. Select LAN from the drop-down menu. Field Interface Received/Transmitted Bytes Pkts Errs Drops Description LAN interface(s) Number of Bytes Number of Packets Number of packets with errors Number of dropped packets
  • Asus DSL-N12HP | users manual in English - Page 24
    statistics for each WAN interface. Select WAN from the drop-down menu. Field Interface Description Received/Transmitted Bytes Pkts Errs Drops Description WAN interface(s) WAN service label Number of Bytes Number of Packets Number of packets with errors Number of dropped packets 24
  • Asus DSL-N12HP | users manual in English - Page 25
    xTM Statistics The following figure shows ATM (Asynchronous Transfer Mode)/ PTM (Packet Transfer Mode) statistics. Select xTM from the drop-down menu. Field Port Number In Octets Out Octets In Packets Out Packets In OAM Cells Out OAM Cells In ASM Cells Out ASM Cells In Packet Errors In Cell Errors
  • Asus DSL-N12HP | users manual in English - Page 26
    xDSL Statistics The xDSL Statistics screen displays information corresponding to the xDSL type. 26
  • Asus DSL-N12HP | users manual in English - Page 27
    ) SNR Margin (0.1 dB) Attenuation (0.1 dB) Output Power (0.1 dBm) Attainable Rate (Kbps) Rate (Kbps) Description ADSL2, ADSL2+ ATM Lists the status of the DSL link Link output power state. Shows the status of PhyR™ (Physical Layer Re-Transmission) impulse noise protection Trellis On/Off Signal to
  • Asus DSL-N12HP | users manual in English - Page 28
    HEC Errors OCD Errors LCD Errors Total Cells Data Cells Bit Errors Total Number of Header Error Checksum errors Total Number of Out-of-Cell Delineation errors Total number of Loss of Cell Delineation Total number of ATM cells (including idle + data cells) Total number of ATM data cells Total number
  • Asus DSL-N12HP | users manual in English - Page 29
    Click Start to start the test or click Close to cancel the test. After the BER testing is complete, the pop-up window will display as follows. xDSL TONE GRAPH Click Draw Graph on the xDSL Statistics screen and a pop-up window will display the DSL line statistics. 29
  • Asus DSL-N12HP | users manual in English - Page 30
    3.1.3 Route Click the Route tab to display the routes that the DSL-N12HP has found. Field Destination Gateway Subnet Mask Flag Metric Service Interface Description Destination network or destination host Next hop IP address Subnet Mask of Destination U: route is up !: reject route G: use gateway
  • Asus DSL-N12HP | users manual in English - Page 31
    3.1.4 Clients Status Click the Clients Status tab to display the Client information. Field IP address Flags HW Address Device Description Shows IP address of host pc Complete, Incomplete, Permanent, or Publish Shows the MAC address of host pc Shows the connection interface 31
  • Asus DSL-N12HP | users manual in English - Page 32
    3.1.5 DHCP Click the DHCP tab to display all DHCP Leases. Select DHCPv4 from the drop-down menu. Field Hostname MAC Address IP Address Expires In Description Shows the host name of device/host/PC Shows the Ethernet MAC address of the device/host/PC Shows IP address of device/host/PC Shows how
  • Asus DSL-N12HP | users manual in English - Page 33
    3.1.6 NAT Session Click the NAT Session tab to display the following. Click Show All to display the following. Field Source IP Source Port Destination IP Destination Port Protocol Timeout Description The source IP from which the NAT session is established The source port from which the NAT session
  • Asus DSL-N12HP | users manual in English - Page 34
    received/configured on the WAN interface The CPE's LAN Address The default WAN IPv6 gateway The IPv6 DNS servers received from the WAN interface / configured manually 34
  • Asus DSL-N12HP | users manual in English - Page 35
    IPv6 Neighbor Select IPv6 Neighbor from the drop-down menu. Field IPv6 Address Flags HW Address Device Description Ipv6 address of the device(s) found Status of the neighbor device MAC address of the neighbor device Interface from which the device is located IPv6 Route Select IPv6 Route from
  • Asus DSL-N12HP | users manual in English - Page 36
    3.2 Basic Setup You can reach this page by clicking on the Basic Setup icon located on the left side of the screen. This will bring you to the following screen. 36
  • Asus DSL-N12HP | users manual in English - Page 37
    3.2.1 Layer 2 Interface Add or remove ATM and ETH WAN interface connections here. Click Add to create a new ATM interface (see Appendix E Connection Setup). NOTE: Up to 8 ATM interfaces can be created and saved in flash memory. To remove a connection, select its Remove column radio button and click
  • Asus DSL-N12HP | users manual in English - Page 38
    3.2.1 Layer 2 Interface Add or remove ATM and ETH WAN interface connections here. Click Add to create a new ATM interface (see Appendix E Connection Setup). NOTE: Up to 8 ATM interfaces can be created and saved in flash memory. To remove a connection, select its Remove column radio button and click
  • Asus DSL-N12HP | users manual in English - Page 39
    connections on ATM or ETH WAN interfaces see Appendix E - Connection Setup. To remove a connection, select its Remove column radio button and ETH and ATM service connections cannot coexist. In Default Mode, up to 8 WAN connections can be configured; while VLAN Mux Connection Mode supports up to 16
  • Asus DSL-N12HP | users manual in English - Page 40
    3.2.3 LAN Click the LAN tab to display the following. Configure the LAN interface settings and then click Apply/Save. Consult the field descriptions below for more details. GroupName: Select an Interface Group. 1st LAN INTERFACE IP Address: Enter the IP address for the LAN port. Subnet Mask: Enter
  • Asus DSL-N12HP | users manual in English - Page 41
    . DHCP Server: To enable DHCP, select Enable DHCP server and enter Start and End IP addresses and the Leased Time. This setting configures the router to automatically assign IP, default gateway and DNS server addresses to every PC on your LAN. Setting TFTP Server: Enable by ticking the checkbox
  • Asus DSL-N12HP | users manual in English - Page 42
    2ND LAN INTERFACE To configure a secondary IP address, tick the checkbox outlined (in RED) below. IP Address: Enter the secondary IP address for the LAN port. Subnet Mask: Enter the secondary subnet mask for the LAN port. Ethernet Media Type: 42
  • Asus DSL-N12HP | users manual in English - Page 43
    3.2.4 IPv6 Click the IPv6 tab to display the following. 43
  • Asus DSL-N12HP | users manual in English - Page 44
    LAN IPv6 Auto Configuration Select IPv6 LAN Auto Configuration from the drop-down menu. Configure the LAN interface settings and then click Save/Apply. 44
  • Asus DSL-N12HP | users manual in English - Page 45
    Consult the field descriptions below for more details. LAN IPv6 Link-Local Address Configuration Field EUI-64 User Setting Description Use EUI-64 algorithm to calculate link-local address from MAC address Use the Interface Identifier field to define a link-local address Static LAN IPv6 Address
  • Asus DSL-N12HP | users manual in English - Page 46
    To add an entry, enter MAC address and Interface ID and then click Apply/Save. To remove an entry, tick the corresponding checkbox in the Remove column and then click Remove Entries. 46
  • Asus DSL-N12HP | users manual in English - Page 47
    all nodes on a link use the same MTU value Use prefix length receive from WAN interface Manually configure prefix, prefix length, preferred lifetime and valid lifetime used in router advertisement Allow RADVD to advertise Unique Local Address Prefix Use a Randomly Generated Prefix Specify the prefix
  • Asus DSL-N12HP | users manual in English - Page 48
    Static ARP/IP Neighbor Configuration Select Static ARP/IP Neighbor Configuration from the dropdown menu. Click the Add button to display the following. Click Apply/Save to apply and save the settings. Field IP Version IP Address MAC Address Associated Interface Description The IP version used
  • Asus DSL-N12HP | users manual in English - Page 49
    3.2.5 Security To display this function, you must enable the firewall feature in WAN Setup. For detailed descriptions, with examples, please consult Appendix A - Firewall. Click the Security tab to display the following. 49
  • Asus DSL-N12HP | users manual in English - Page 50
    conditions must be fulfilled. NOTE: This function is not available when in bridge mode. Instead, MAC Filtering performs a similar function. Select IP Filtering Setup from the drop-down menu. INCOMING IP FILTER By default, all incoming IP traffic is blocked, but IP traffic can be allowed with filters
  • Asus DSL-N12HP | users manual in English - Page 51
    To add a filter (to allow incoming IP traffic), click the Add button. On the following screen, enter your filter criteria and then click Apply/Save. Consult the table below for field descriptions. Field Filter Name IP Version Protocol Policy Source IP address Source Port (port or port:port)
  • Asus DSL-N12HP | users manual in English - Page 52
    OUTGOING IP FILTER By default, all outgoing IP traffic is allowed, but IP traffic can be blocked with filters. To add a filter (to block some outgoing IP traffic), click the Add button. On the following screen, enter your filter criteria and then click Apply/Save. Consult the table below for field
  • Asus DSL-N12HP | users manual in English - Page 53
    based on the originating device. MAC filtering policy and rules for the DSL-N12HP can be set according to the following procedure. The MAC Filtering Global can be changed by clicking the Change Policy button. Select MAC Filtering Setup from the drop-down menu. Choose Add or Remove to configure MAC
  • Asus DSL-N12HP | users manual in English - Page 54
    Click Save/Apply to save and activate the filter rule. Consult the table below for detailed field descriptions. Field Protocol Type Destination MAC Address Source MAC Address Frame Direction WAN Interfaces Description PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, IGMP Defines the destination MAC
  • Asus DSL-N12HP | users manual in English - Page 55
    control functionality. Click on the Parental Control tab to display the following. Time Restriction This feature restricts access from a LAN device to an outside network through the device on selected days at certain times. Make sure to activate the Internet Time server synchronization
  • Asus DSL-N12HP | users manual in English - Page 56
    Click Add to display the following screen. See below for field descriptions. User Name: A user-defined label for this restriction. Browser's MAC Address: MAC address of the PC running the browser. Other MAC Address: MAC address of another LAN device. Days of the Week: The days the restrictions apply
  • Asus DSL-N12HP | users manual in English - Page 57
    URL address and port number. Select URL Filter from the drop-down menu. Select the Deny radio button to deny access to the websites listed. Select the Allow radio button to restrict access to only those listed websites. Then click Add to display the following screen. Enter the URL address and port
  • Asus DSL-N12HP | users manual in English - Page 58
    A maximum of 100 entries can be added to the URL Filter list. 3.2.7 Routing The following routing functions are accessed from this menu: Default Gateway, Static Route, Policy Routing, RIP and IPv6 Static Route. NOTE: In bridge mode, the RIP menu option is hidden while
  • Asus DSL-N12HP | users manual in English - Page 59
    Default Gateway Select Default Gateway from the drop-down menu. Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN
  • Asus DSL-N12HP | users manual in English - Page 60
    Static Route This option allows for the configuration of static routes by destination IP. Click Add to create a static route or click Remove to delete a static route. Select Static Route from the drop-down menu. Click Add to display the following screen. IP Version: Select the IP version to be IPv4.
  • Asus DSL-N12HP | users manual in English - Page 61
    Policy Routing This option allows for the configuration of static routes by policy. Select Policy Routing from the drop-down menu. Click Remove to delete an entry. Click Add to display the following. Complete the form and click Apply/Save to create a policy. Field Policy Name Physical LAN Port
  • Asus DSL-N12HP | users manual in English - Page 62
    RIP Configuration Select RIP Configuration from the drop-down menu. To activate RIP for the WAN Interface, select the desired RIP version and operation and place a check in the "Enabled" checkbox. To stop RIP on the WAN Interface, uncheck the "Enabled" checkbox. Click Apply/Save to start/stop RIP
  • Asus DSL-N12HP | users manual in English - Page 63
    can reach this page by clicking on the Advanced Setup icon located on the left side of the screen. This will bring you to the following screen. 3.3.1 NAT NOTE: To display this option, NAT must
  • Asus DSL-N12HP | users manual in English - Page 64
    Virtual Servers Virtual Servers allow you to direct incoming traffic from the WAN side (identified by Protocol and External port) to the internal server with private IP addresses on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number
  • Asus DSL-N12HP | users manual in English - Page 65
    of their choice. Enter the IP address for the server. Allows local machines to access virtual server via WAN IP Address Enter the starting external port number (when you select Custom Server). When a service is selected, the port ranges are automatically configured. Enter the ending external port
  • Asus DSL-N12HP | users manual in English - Page 66
    that specific ports in the firewall be opened for access by the remote parties. Port Triggers dynamically 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the 'Triggering Ports'. The Router allows the remote party from the WAN side to
  • Asus DSL-N12HP | users manual in English - Page 67
    Click Save/Apply to save and apply the settings. Consult the table below for field and header descriptions. Field Use Interface Select an Application Custom Application Trigger Port Start Trigger Port End Trigger Protocol Open Port Start Open Port End Open Protocol Description Select a WAN
  • Asus DSL-N12HP | users manual in English - Page 68
    DMZ Host The DSL router will forward IP packets from the WAN that do not belong to any of the applications configured in the Virtual host, clear the IP address field and click Save/Apply. Enable NAT Loopback allows PC on the LAN side to access servers in the LAN network via the router's WAN IP. 68
  • Asus DSL-N12HP | users manual in English - Page 69
    IP The beginning of the public IP The ending of the public IP Remove this rule Click the Add button to display the following. Select a Service, then click the Save/Apply button. One to One: mapping one local IP to a specific public IP Many to one: mapping a range of local IP
  • Asus DSL-N12HP | users manual in English - Page 70
    IPSEC ALG IPSEC ALG provides multiple VPN passthrough connection support, allowing different clients on LAN side to establish a secured IP Connection to the WAN server. Select IPSEC ALG from the drop-down menu. To enable
  • Asus DSL-N12HP | users manual in English - Page 71
    3.3.2 Quality of Service (QoS) NOTE: QoS must be enabled in at least one PVC to display this option. (See Appendix E - Connection Setup for detailed PVC setup instructions). Click the QoS tab to display the following. 71
  • Asus DSL-N12HP | users manual in English - Page 72
    Setup from the drop-down menu. To Enable QoS tick the checkbox and select a Default DSCP Mark. Click Apply/Save to activate QoS. QoS and DSCP Mark are defined as follows: Quality of Service requests from Queue Prioritization. Default Differentiated Services Code Point (DSCP) Mark: This specifies the
  • Asus DSL-N12HP | users manual in English - Page 73
    can be configured. In PTM mode, maximum 8 queues can be configured. For each Ethernet interface, maximum 3 queues can be configured. Select QoS Queue Setup from the drop-down menu. To add a queue, click the Add button. To remove queues, check their remove-checkboxes (for user created queues), then
  • Asus DSL-N12HP | users manual in English - Page 74
    page reload. Note that if WMM function is disabled in Wireless Page, queues related to wireless will not take effect. This function follows the Differentiated Services rule of IP QoS. You can create a new Queue entry by clicking the Add button. Enable and assign an interface and precedence on the
  • Asus DSL-N12HP | users manual in English - Page 75
    QoS Policer Setup Select QoS Policer Setup from the drop-down menu. To remove policers, check their remove-checkboxes, then click the Remove button. The Enable button will scan through every policers
  • Asus DSL-N12HP | users manual in English - Page 76
    Click Apply/Save to save the policer. Field Name Enable Meter Type Committed Rate (kbps) Committed Burst Size (bytes) Conforming Action Nonconforming Action Description Name of this policer rule Enable/Disable this policer rule Meter type used for this policer rule Defines the rate allowed for
  • Asus DSL-N12HP | users manual in English - Page 77
    The network traffic classes are listed in the following table. Select QoS Classification Setup from the drop-down menu. Click Add to configure a network traffic class rule and Enable to activate it. To delete an entry from the list,
  • Asus DSL-N12HP | users manual in English - Page 78
    Click Apply/Save to save and activate the rule. Field Traffic Class Name Rule Order Rule Status Classification Criteria Class Interface Ether Type Source MAC Address Source MAC Mask Description Enter a name for the traffic class. Last is the only option. Disable or enable the rule. Select an
  • Asus DSL-N12HP | users manual in English - Page 79
    Field Destination MAC Address Destination MAC Mask Classification Results Specify Class Queue Specify Class Policer Mark Differentiated Service Code Point Mark 802.1p Priority Set Rate Limit Description A packet belongs to SET-1 then the result that the Destination MAC Address of its header binary-
  • Asus DSL-N12HP | users manual in English - Page 80
    3.3.4 DNS Click the DNS tab to display the following. 80
  • Asus DSL-N12HP | users manual in English - Page 81
    back in again. Select DNS Server Configuration from the drop-down menu. Click Apply/Save to save the new configuration. NOTE: You must reboot the router to make the new configuration effective. 81
  • Asus DSL-N12HP | users manual in English - Page 82
    allows you to map a dynamic IP address to a static hostname in any of many domains, allowing the DSLN12HP to be more easily accessed from various locations on the Internet. Select Dynamic DNS from the drop-down menu. To add a dynamic DNS service, click Add. The following screen will display. 82
  • Asus DSL-N12HP | users manual in English - Page 83
    server Enter the password of the dynamic DNS server Enter mail server for DDNS Enter an account level key which can be used to update DNS hosts instead of our HTTP-based DNS update API Enter dynamic DNS server Dynamic DNS server URL Dynamic DNS server name Dynamic DNS server password 83
  • Asus DSL-N12HP | users manual in English - Page 84
    DNS Entries The DNS Entry page allows you to add domain names and IP address desired to be resolved by the DSL router. Select Dynamic DNS from the drop-down menu. Choose Add or Remove to configure DNS Entry. The entries will become active after save/reboot. Enter
  • Asus DSL-N12HP | users manual in English - Page 85
    following. DSL Mode G.Dmt G.lite T1.413 ADSL2 AnnexL ADSL2+ AnnexM Data Transmission Rate - Mbps (Megabits per second) Downstream: 12 Mbps Upstream: 1.3 Mbps Downstream: 4 Mbps Upstream: 0.5 Mbps Downstream: 8 Mbps Upstream: 1.0 Mbps Downstream: 12 Mbps Upstream: 1.0 Mbps Supports longer
  • Asus DSL-N12HP | users manual in English - Page 86
    Enables adaptive handshaking functionality Enables Seamless Rate Adaptation (SRA) Normal (TR-68 compliant): Select this option for DSL LED to operate normally (See section 1.3 Your ADSL modem router) Off:DSL LED will always be OFF Select Equipment Serial Number or Equipment MAC Address to use
  • Asus DSL-N12HP | users manual in English - Page 87
    , when the PC gets an IP via DHCP, the domain name, Home, will be added to PC's DNS Suffix Search List, and the PC can access route with "ASUS.Home". Click the DNS Proxy tab to display the following. Click Apply/Save to implement new configuration settings. 87
  • Asus DSL-N12HP | users manual in English - Page 88
    3.3.7 Interface Grouping Interface Grouping supports multiple ports to PVC and bridging groups. Each group performs as an independent network. To use this Group, click Add. The following screen will appear. It lists the available and grouped interfaces. Follow the instructions shown onscreen. 88
  • Asus DSL-N12HP | users manual in English - Page 89
    Click Apply/Save to implement new configuration settings. 89
  • Asus DSL-N12HP | users manual in English - Page 90
    Add Clients With Following DHCP Vendor IDs: Add support to automatically map LAN interfaces to PVC's using set-top box use only). LAN side clients can get IP addresses from the CPE's DHCP server and access the Internet via PPPoE (0/33). If a set-top box is connected to ETH1 and sends a DHCP
  • Asus DSL-N12HP | users manual in English - Page 91
    3.3.7 IP Tunnel Click on the IP Tunnel tab to display the following. IPv6inIPv4 Configure 6in4 tunneling to encapsulate IPv6 traffic over explicitly-configured IPv4 links. Select 6in4 Tunnel Configuration from the drop-down menu. 91
  • Asus DSL-N12HP | users manual in English - Page 92
    the WAN interface to be used by the tunnel Select the LAN interface to be included in the tunnel Select automatic for point-to-multipoint tunneling/ manual for point-to-point tunneling The subnet mask length used for the IPv4 interface Prefix and prefix length used for the IPv6 interface Input the
  • Asus DSL-N12HP | users manual in English - Page 93
    IPv4inIPv6 Configure 4in6 tunneling to encapsulate IPv4 traffic over an IPv6only environment. Select 4in6 Tunnel Configuration from the drop-down menu. Click the Add button to display the following. Click Apply/Save to implement new configuration settings. Click Return to go back to the previous
  • Asus DSL-N12HP | users manual in English - Page 94
    tunnel deployment Select the WAN interface to be used by the tunnel Select the LAN interface to be included in the tunnel Select automatic for point-to-multipoint tunneling/ manual for point-to-point tunneling Address of Address Family Translation Router 94
  • Asus DSL-N12HP | users manual in English - Page 95
    3.4 Wireless You can reach this page by clicking the Wireless icon located on the left side of the screen. 95
  • Asus DSL-N12HP | users manual in English - Page 96
    3.4.1 Basic The Basic option allows you to configure basic features of the wireless LAN interface. Among other things, you can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on
  • Asus DSL-N12HP | users manual in English - Page 97
    Basic Service Set) within an area. In Infrastructure BSS networks, the BSSID is the MAC (Media Access Control) address of the AP (Access Point); number of clients that can access the router. This router supports multiple SSIDs called Guest SSIDs or Virtual Access Points. To enable one or more
  • Asus DSL-N12HP | users manual in English - Page 98
    the wireless LAN interface. Click the Security tab to display the following. Please see Appendix F for WPS setup instructions. Click Apply/Save to implement new configuration settings. WIRELESS SECURITY Setup requires that the user configure these settings using the Web GUI (see the table below). 98
  • Asus DSL-N12HP | users manual in English - Page 99
    network name from the drop-down menu. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that client will not be granted access. Network Authentication This option specifies whether a network key is used
  • Asus DSL-N12HP | users manual in English - Page 100
    the appropriate network key. Security options include authentication and encryption services based on the wired equivalent privacy (WEP) algorithm. WEP is a set of security services used to protect 802.11 networks from unauthorized access, such as eavesdropping; in this case, the capture of wireless
  • Asus DSL-N12HP | users manual in English - Page 101
    3.4.3 MAC Filter This option allows access to the router to be restricted based upon MAC addresses. Click the network name from the drop-down box. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that user
  • Asus DSL-N12HP | users manual in English - Page 102
    disables Access Point (AP) functionality, while selecting Access Point enables AP functionality. In Access Point mode access. Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in the Remote Bridges list will be granted access. Click Refresh to update
  • Asus DSL-N12HP | users manual in English - Page 103
    , set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used. Click the Wireless Bridge tab to display the following. Click Apply/Save
  • Asus DSL-N12HP | users manual in English - Page 104
    802.11n Rate 802.11n Protection Support 802.11n Client Only RIFS access to the router. One of several draft-n features designed to improve efficiency. Provides a shorter delay between OFDM transmissions than in802.11a or g. Co-existence between 20 MHZ AND 40 MHZ overlapping Basic Service
  • Asus DSL-N12HP | users manual in English - Page 105
    to know when to wake up to receive the beacon (and learn whether there are buffered frames at the access point). The maximum number of clients that can connect to the router. Xpress Technology is compliant with draft specifications of two planned wireless industry standards. Set the power output (by
  • Asus DSL-N12HP | users manual in English - Page 106
    3.4.6 Site Survey The graph displays wireless APs found in your neighborhood by channel. Click the Site Survey tab to display the following. 106
  • Asus DSL-N12HP | users manual in English - Page 107
    Point, along with the amount of time since packets were transferred to and from each station. If a station is idle for too long, it is removed from this list. Lists those devices with authorized access. Lists which SSID of the modem that the stations connect to. Lists which interface of the modem
  • Asus DSL-N12HP | users manual in English - Page 108
    " at the bottom of this page to make sure the fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures. 108
  • Asus DSL-N12HP | users manual in English - Page 109
    line, ETH or Layer 3 connection is down, the uptime will stop incrementing. If the service is restored, the counter will reset and start from 0. A Bridge interface will follow the DSL or ETH timer. Click the Uptime Status tab to display the following. The ClearAll button will restart the counters
  • Asus DSL-N12HP | users manual in English - Page 110
    4.2 Management You can reach this page by clicking on the Management icon located on the left side of the screen. 4.2.1 Settings Click on the Settings tab to display the following. This includes Restore Default, Save Setting, and Restore Setting screens. 110
  • Asus DSL-N12HP | users manual in English - Page 111
    to match any new settings. NOTE: This entry has the same effect as the Reset button. The DSLN12HP board hardware and the boot loader support the reset to default. If the Reset button is continuously pressed for more than 10 seconds, the boot loader will erase the configuration data saved
  • Asus DSL-N12HP | users manual in English - Page 112
    Save Setting To save the current configuration to a file on your PC, click the Save button. You will be prompted for backup file location. This file can later be used to recover settings on the Restore Setting screen, as described below. Upload Setting This option recovers configuration files
  • Asus DSL-N12HP | users manual in English - Page 113
    4.2.2 System Log This function allows a system log to be kept and viewed upon request. Click the System Log tab to display the following. Select the desired values and click Apply/Save to configure the system log options. Consult the table below for detailed descriptions of each system log option.
  • Asus DSL-N12HP | users manual in English - Page 114
    this level. The events ranging from the highest critical level "Emergency" down to this configured level will be recorded to the log buffer on the DSL-N12HP SDRAM. When the log buffer is full, the newer event will wrap up to the top of the log buffer and overwrite the old event
  • Asus DSL-N12HP | users manual in English - Page 115
    4.2.3 Internet Time This option automatically synchronizes the router time with Internet timeservers. Click the Internet Time tab to display the following. To . In addition, this menu item is not displayed when in Bridge mode since the router would not be able to connect to the NTP timeserver. 115
  • Asus DSL-N12HP | users manual in English - Page 116
    tab to display the following. Passwords This screen is used to configure the user account access passwords for the device. Select Access Control - Accounts/Passwords from the dropdown menu. Use the fields to update passwords for the accounts administration. NOTE: Passwords may be as long as 16
  • Asus DSL-N12HP | users manual in English - Page 117
    Service Access The Services option limits or opens the access services over the LAN or WAN. Select Access Control - Service Access from the drop-down menu. These access services available are: HTTP, SSH, TELNET, HTTPS and ICMP. Enable a service by selecting its drop-down list box. Click Apply/Save
  • Asus DSL-N12HP | users manual in English - Page 118
    -down menu. Click the Add button to display the following. Configure the address and subnet of the management station permitted to access the local management services, and click Save/Apply. IP Address - IP address of the management station. Subnet Mask - Subnet address for the management station
  • Asus DSL-N12HP | users manual in English - Page 119
    allows for firmware upgrades from a locally stored file. Click the Update Software tab to display the following. 1. Obtain an updated software image to save_default configuration after software upgrade. Erase All - Router will be restored to factory default configuration after software upgrade
  • Asus DSL-N12HP | users manual in English - Page 120
    feedback is very important to us and will help to improve the firmware of DSL-N12HP. If you have any comments, suggestions or connection issue, complete the form below, these information along with current DSL logs will be send to ASUS Support Team. In order to allow us to respond to your feedback
  • Asus DSL-N12HP | users manual in English - Page 121
    5 Logout & Reboot To log out from the device simply click the Logout button at the top of your screen. When the following window pops up, click the OK button to exit the router. Upon successful exit, the following message will be displayed. 121
  • Asus DSL-N12HP | users manual in English - Page 122
    To reboot the device simply click the Reboot button at the top of your screen. While rebooting, the following message will be displayed. 122
  • Asus DSL-N12HP | users manual in English - Page 123
    packet header. DENIAL OF SERVICE ATTACK Is an incident in which a user or organization is deprived of the services of a resource they would Routing interface is created, Enable Firewall must be checked. Navigate to Advanced Setup > Security > IP Filtering. OUTGOING IP FILTER Helps in setting rules to
  • Asus DSL-N12HP | users manual in English - Page 124
    This filter will Drop all TCP packets coming from the LAN with IP Address/Subnet Mask of 192.168.1.45/24 having a source port of 80 irrespective of the destination. All other packets will be Accepted. Example 2: Filter Name: Out_Filter2 Protocol: UDP Source IP Address: 192.168
  • Asus DSL-N12HP | users manual in English - Page 125
    filtering of Layer 2 traffic. MAC Filtering is only effective in Bridge mode. After a Bridge mode connection is created, navigate to Advanced Setup > Security > MAC Filtering in the Web GUI. Example 1: Global Policy: Forwarded Protocol Type: PPPoE Dest. MAC Address: 00:12:34:56
  • Asus DSL-N12HP | users manual in English - Page 126
    :12:78:90:56. All other frames on this interface are dropped. DAYTIME PARENTAL CONTROL This feature restricts access of a selected LAN device to an outside Network through the DSL-N12HP , as per chosen days of the week and the chosen times. Example: User Name: FilterJohn Browser's MAC
  • Asus DSL-N12HP | users manual in English - Page 127
    /Receive data 2 (negative lead) 6 TRD-(1) Transmit/Receive data 1 (negative lead) 7 TRD+(3) Transmit/Receive data 3 (positive lead) 8 TRD-(3) Transmit/Receive data 3 (negative lead) DSL Port Table 3 Pin Signal definition 1 LINE2 TIP 2 LINE1 TIP 3 LINE1 RING 4 LINE2 RING 127
  • Asus DSL-N12HP | users manual in English - Page 128
    T1.413 Issue 2, Annex A/L/M LAN Interface • Standard IEEE 802.3, IEEE 802.3u • Support MDI/MDX • 10/100 Base T Auto-sense Wireless Interface • IEEE802.11b/g/n • 64, TFTP/FTP upgrade • Telnet remote access support • Support Web based configuration • Support for backup & restore configuration to/from
  • Asus DSL-N12HP | users manual in English - Page 129
    PAP, CHAP, Packet and MAC address filtering, SSH • VPN termination • Three level login including local admin, local user and remote technical support access QoS • Packet level QoS classification rules, • Priority queuing using ATM/PTM TX queues, • IP TOS/Precedence, • 802.1p marking, • DiffServ DSCP
  • Asus DSL-N12HP | users manual in English - Page 130
    Firewall • Stateless Packet Filter • Denial of Service (DOS): ARP attacks, Ping attacks, Ping of Death, LAND,SYNC, Smurf, Unreachable, Teardrop • TCP/IP/Port/interface filtering rules Support both incoming and outgoing filtering NAT/NAPT • Support Port Triggering and Port forwarding • Symmetric port
  • Asus DSL-N12HP | users manual in English - Page 131
    for the LAN or WAN from the Management > Access Control > Services menu in the Web GUI. To access the router using the Linux ssh client For LAN access, type: ssh -l root 192.168.1.1 For WAN access, type: ssh -l support WAN IP address To access the router using the Windows "putty" ssh client For LAN
  • Asus DSL-N12HP | users manual in English - Page 132
    connection types are not supported for Ethernet WAN interfaces. After adding WAN connections to an interface, you must also create an Interface Group to connect LAN/WAN interfaces. E1.1 ATM Interfaces Follow these procedures to configure an ATM interface. NOTE: The DSL-N12HP supports up to 16 ATM
  • Asus DSL-N12HP | users manual in English - Page 133
    table is provided here for ease of reference. Field Interface VPI VCI DSL Latency Category Max Burst Size Link Type Connection Mode IP QoS MPAAL Remove Default Mode - Single service over one connection Vlan Mux Mode - Multiple Vlan service over one connection Quality of Service (QoS) status QoS
  • Asus DSL-N12HP | users manual in English - Page 134
    There are many settings here including: VPI/VCI, DSL Link Type, Encapsulation Mode, Service Category, Connection Mode and Quality of Service. Here are the available encapsulations for each xDSL Link Type: • EoA- LLC/SNAP-BRIDGING, VC/MUX • PPPoA- VC/MUX, LLC/ENCAPSULATION • IPoA- LLC/SNAP-ROUTING,
  • Asus DSL-N12HP | users manual in English - Page 135
    Ethernet WAN interface. This table is provided here for ease of reference. Field Interface/ (Name) Connection Mode Remove Description WAN interface name. Default Mode - Single service over one interface. Vlan Mux Mode - Multiple Vlan services over one interface. Select interfaces to remove. 135
  • Asus DSL-N12HP | users manual in English - Page 136
    2. Select an Ethernet port and Click Apply/Save to confirm your choices. On the next screen, check that the ETHERNET interface is added to the list. 136
  • Asus DSL-N12HP | users manual in English - Page 137
    E2 WAN Connections The DSL-N12HP supports one WAN connection for each interface, up to a maximum of 16 connections. 1. Click the WAN Service tab to display the following. 2. Click the Add button to create a WAN connection. The following screen will display. 3. Choose a layer 2 interface from the
  • Asus DSL-N12HP | users manual in English - Page 138
    NOTE: The WAN services shown here are those supported by the layer 2 enter Priority & VLAN ID tags. 5. You will now follow the instructions specific to the WAN service type you wish to establish. This list should help you locate the that follow continue the WAN service setup procedure. 138
  • Asus DSL-N12HP | users manual in English - Page 139
    E2.1 PPP over ETHERNET (PPPoE) 1. Select the PPP over Ethernet radio button and click Next. You can also enable IPv6 by ticking the checkbox at the bottom of this screen. 2. On the next screen, enter the PPP settings as provided by your ISP. Click Next to continue or click Back to return to the
  • Asus DSL-N12HP | users manual in English - Page 140
    The settings shown above are described below. PPP SETTINGS The PPP Username, PPP password and the PPPoE Service Name entries are dependent on the particular requirements of the ISP. The user name can be a maximum of 256 characters and the password a maximum of
  • Asus DSL-N12HP | users manual in English - Page 141
    sending a packet to the mapped external address. DIAL ON DEMAND The DSL-N12HP can be configured to disconnect if there is no activity for a is a special feature deployed by some service providers. Unless your service provider specifically requires this setup, do not select it. PPP IP Extension
  • Asus DSL-N12HP | users manual in English - Page 142
    the user should select this checkbox. The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is resources for better performance. USE STATIC IPv4 ADDRESS Unless your service provider specially requires it, do not select this checkbox. If
  • Asus DSL-N12HP | users manual in English - Page 143
    PPPoE clients, otherwise disable it. The DSL-N12HP supports passthrough PPPoE sessions from the LAN side /Disable multicast VLAN filter. Enable WAN interface with base MAC Enable this option to use the router's base MAC address as the MAC address for this WAN interface. 3. Choose an interface to
  • Asus DSL-N12HP | users manual in English - Page 144
    return to the previous step. 4. The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After clicking Apply/Save, the new service should appear on the main screen. To activate
  • Asus DSL-N12HP | users manual in English - Page 145
    E2.2 IP over ETHERNET (IPoE) 1. Select the IP over Ethernet radio button and click Next. NOTE: For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID. For untagged service, set -1 to both 802.1P Priority and 802.1Q VLAN ID. 145
  • Asus DSL-N12HP | users manual in English - Page 146
    access to the DHCP server settings. You can select the Obtain an IP address automatically radio button to enable DHCP (use the DHCP Options only if necessary). However, if you prefer, you can instead use the Static IP address method to assign WAN IP address, Subnet Mask and Default Gateway manually
  • Asus DSL-N12HP | users manual in English - Page 147
    3. This screen provides access to NAT, Firewall and IGMP Multicast settings. Enable each by with a private IP address, the user should select this checkbox. The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is not used on the LAN side
  • Asus DSL-N12HP | users manual in English - Page 148
    multicast. IGMP is a protocol used by IPv4 hosts to report their multicast group memberships to any neighboring multicast routers. Enable WAN interface with base MAC Enable this option to use the router's base MAC address as the MAC address for this WAN interface. 4. To choose an interface to be the
  • Asus DSL-N12HP | users manual in English - Page 149
    5. Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. If IPv6 is enabled, the following will also be shown
  • Asus DSL-N12HP | users manual in English - Page 150
    6. The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After clicking Apply/Save, the new service should appear on the main screen. To activate it, you must click the
  • Asus DSL-N12HP | users manual in English - Page 151
    E2.3 Bridging 1. Select the Bridging radio button and click Next. NOTE: For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID. For untagged service, set -1 to both 802.1P Priority and 802.1Q VLAN ID. 151
  • Asus DSL-N12HP | users manual in English - Page 152
    Apply/Save, the new service should appear on the main screen. To activate it, you must click the Reboot button at the top of the screen to reboot. NOTE: If this bridge connection is your only WAN service, the DSLN12HP will be inaccessible for remote management or technical support from the WAN. 152
  • Asus DSL-N12HP | users manual in English - Page 153
    E2.4 PPP over ATM (PPPoA) 1. Click Next to continue. 2. On the next screen, enter the PPP settings as provided by your ISP. Click Next to continue or click Back to return to the previous step. 153
  • Asus DSL-N12HP | users manual in English - Page 154
    sending a packet to the mapped external address. DIAL ON DEMAND The DSL-N12HP can be configured to disconnect if there is no activity for a is a special feature deployed by some service providers. Unless your service provider specifically requires this setup, do not select it. PPP IP Extension
  • Asus DSL-N12HP | users manual in English - Page 155
    user should select this checkbox. The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is system resources for better performance. USE STATIC IPv4 ADDRESS Unless your service provider specially requires it, do not select this checkbox. If
  • Asus DSL-N12HP | users manual in English - Page 156
    NO MULTICAST VLAN FILTER Tick the checkbox to Enable/Disable multicast VLAN filter. Enable WAN interface with base MAC Enable this option to use the router's base MAC address as the MAC address for this WAN interface. 3. Choose an interface to be the default gateway. Click Next to continue or click
  • Asus DSL-N12HP | users manual in English - Page 157
    an interface to be the default gateway. Click Next to continue or click Back to return to the previous step. 5. The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After
  • Asus DSL-N12HP | users manual in English - Page 158
    IP over ATM (IPoA) 1. Click Next to continue. 2. Enter the WAN IP settings provided by your ISP. Click Next to continue. 3. This screen provides access to NAT, Firewall and IGMP Multicast settings. Enable each by selecting the appropriate checkbox. Click Next to continue or click Back to return to
  • Asus DSL-N12HP | users manual in English - Page 159
    the user should select this checkbox. The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is not memberships to any neighboring multicast routers. Enable WAN interface with base MAC Enable this option to use the router's base MAC address as
  • Asus DSL-N12HP | users manual in English - Page 160
    4. Choose an interface to be the default gateway. Click Next to continue or click Back to return to the previous step. 5. Choose an interface to be the default gateway. Click Next to continue or click Back to return to the previous step. 160
  • Asus DSL-N12HP | users manual in English - Page 161
    6. The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After clicking Apply/Save, the new service should appear on the main screen. To activate it, you must click the
  • Asus DSL-N12HP | users manual in English - Page 162
    Appendix F - WPS OPERATION This section shows the basic AP WPS Operation procedure. F1 Add Enrollee with Pin Method 1. Click on the Wireless tab on the left side of your screen. Then, click on the Security tab to display the following. 2. Select Enabled from the Enable WPS drop-down menu. Click the
  • Asus DSL-N12HP | users manual in English - Page 163
    Station to start WPS Adding Enrollee. F2 Add Enrollee with PBC Method 1. Press the WPS/Wi-Fi button on the back panel of the router to activate WPS PBC operation. 4. 3. 2. 1. 2. Operate Station (your dongle for example) to start WPS Adding Enrollee. 3. Press more than 5 seconds to trigger WPS
  • Asus DSL-N12HP | users manual in English - Page 164
    Appendix G Notices ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to other components, as well as the packaging materials. Please go to http://csr.asus. com/english/Takeback.htm for the detailed recycling information in different regions. REACH
  • Asus DSL-N12HP | users manual in English - Page 165
    This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
  • Asus DSL-N12HP | users manual in English - Page 166
    Safety Information To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements -
  • Asus DSL-N12HP | users manual in English - Page 167
    operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during
  • Asus DSL-N12HP | users manual in English - Page 168
    of the GPL with every CD shipped with our product. All future firmware updates will also be accompanied with their respective source code. Please visit our web site for updated information. Note that we do not offer direct support for the distribution. GNU GENERAL PUBLIC LICENSE Version 2, June 1991
  • Asus DSL-N12HP | users manual in English - Page 169
    price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces
  • Asus DSL-N12HP | users manual in English - Page 170
    is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid
  • Asus DSL-N12HP | users manual in English - Page 171
    act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute
  • Asus DSL-N12HP | users manual in English - Page 172
    the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the
  • Asus DSL-N12HP | users manual in English - Page 173
    , unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
  • Asus DSL-N12HP | users manual in English - Page 174
    Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any
  • Asus DSL-N12HP | users manual in English - Page 175
    License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any
  • Asus DSL-N12HP | users manual in English - Page 176
    Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
  • Asus DSL-N12HP | users manual in English - Page 177
    For Turkey only Authorised distributors in Turkey: BOGAZICI BIL GISAYAR SAN. VE TIC. A.S. Tel. No.: +90 212 3311000 Address: AYAZAGA MAH. KEMERBURGAZ CAD. NO.10 AYAZAGA/ISTANBUL CIZGI Elektronik San. Tic. Ltd. Sti. Tel. No.: +90 212 3567070 Address: CEMAL SURURI CD. HALIM MERIC IS MERKEZI
  • Asus DSL-N12HP | users manual in English - Page 178
    . (Asia Pacific) Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Website www.asus.com.tw Technical Support Telephone Support Fax Online support +886228943447 +886228907698 support.asus.com ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone
  • Asus DSL-N12HP | users manual in English - Page 179
    800-92491 0033-170949400 0049-1805010920 0049-1805010923 (component support) 0049-2102959911 ( Fax ) 0036-15054561 199-400089 596766888 0041-848111010 0041-848111014 0041-848111012 0044-1442265548 0035-31890719918 008-800-100-ASUS 0038-0445457727 Service Hours 09:00-13:00 ; 14:00-18:00 Mon-Fri 09:00
  • Asus DSL-N12HP | users manual in English - Page 180
    0065-67203835 ( Repair Status Only ) 0060-320535077 1800-18550163 1800-2090365 0062-2129495000 500128 (Local Only) 1900-555581 00852-35824770 1-812-282-2787 001-8008367847 Service Hours 09:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri 09:00-17:00 Sat-Sun
  • Asus DSL-N12HP | users manual in English - Page 181
    67408838 Lithuania-Kaunas 00370-37329000 Lithuania-Vilnius 00370-522101160 Service Hours 09:00-18:00 Sun-Thu 09:00- 00-18:00 Mon-Fri NOTE: For more information, visit the ASUS support site at: http://support.asus.com Manufacturer: Authorised representative in Europe: ASUSTeK Computer Inc. Tel:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
DSL-N12HP
300Mbps Wi-Fi ADSL Modem Router
User Guide