Asus DSL-N12HP users manual in English - Page 40
LAN, Apply/Save, GroupName, IP Address, Subnet Mask, IGMP Snooping, Standard Mode, Blocking Mode
View all Asus DSL-N12HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3.2.3 LAN Click the LAN tab to display the following. Configure the LAN interface settings and then click Apply/Save. Consult the field descriptions below for more details. GroupName: Select an Interface Group. 1st LAN INTERFACE IP Address: Enter the IP address for the LAN port. Subnet Mask: Enter the subnet mask for the LAN port. IGMP Snooping: Standard Mode: In standard mode, multicast traffic will flood to all bridge ports when no client subscribes to a multicast group - even if IGMP snooping is enabled. Blocking Mode: In blocking mode, the multicast data traffic will be blocked and not flood to all bridge ports when there are no client subscriptions to any multicast group. 40
40
3.2.3 LAN
Click the
LAN
tab to display the following.
Configure the LAN interface settings and then click
Apply/Save
.
Consult the field descriptions below for more details.
GroupName
: Select an Interface Group.
1st LAN INTERFACE
IP Address
: Enter the IP address for the LAN port.
Subnet Mask
: Enter the subnet mask for the LAN port.
IGMP Snooping
:
Standard Mode
: In standard mode, multicast traffic will
flood to all bridge ports when no client subscribes to a
multicast group – even if IGMP snooping is enabled.
Blocking Mode
: In blocking mode, the multicast data traffic
will be blocked and not flood to all bridge ports when there
are no client subscriptions to any multicast group.