Asus DSL-N12HP users manual in English - Page 105
Delivery Traffic Indication Message DTIM is also known
View all Asus DSL-N12HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Field Basic Rate Fragmentation Threshold RTS Threshold DTIM Interval Beacon Interval Global Max Clients Xpress TM Technology Transmit Power WMM (Wi-Fi Multimedia) WMM No Acknowledgement WMM APSD Description Setting for basic transmission rate. A threshold, specified in bytes, that determines whether packets will be fragmented and at what size. On an 802.11 WLAN, packets that exceed the fragmentation threshold are fragmented, i.e., split into, smaller units suitable for the circuit size. Packets smaller than the specified fragmentation threshold value are not fragmented. Enter a value between 256 and 2346. If you experience a high packet error rate, try to slightly increase your Fragmentation Threshold. The value should remain at its default setting of 2346. Setting the Fragmentation Threshold too low may result in poor performance. Request to Send, when set in bytes, specifies the packet size beyond which the WLAN Card invokes its RTS/ CTS mechanism. Packets that exceed the specified RTS threshold trigger the RTS/CTS mechanism. The NIC transmits smaller packet without using RTS/CTS. The default setting of 2347 (maximum length) disables RTS Threshold. Delivery Traffic Indication Message (DTIM) is also known as Beacon Rate. The entry range is a value between 1 and 65535. A DTIM is a countdown variable that informs clients of the next window for listening to broadcast and multicast messages. When the AP has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. AP Clients hear the beacons and awaken to receive the broadcast and multicast messages. The default is 1. The amount of time between beacon transmissions in milliseconds. The default is 100 ms and the acceptable range is 1 - 65535. The beacon transmissions identify the presence of an access point. By default, network devices passively scan all RF channels listening for beacons coming from access points. Before a station enters power save mode, the station needs the beacon interval to know when to wake up to receive the beacon (and learn whether there are buffered frames at the access point). The maximum number of clients that can connect to the router. Xpress Technology is compliant with draft specifications of two planned wireless industry standards. Set the power output (by percentage) as desired. The technology maintains the priority of audio, video and voice applications in a Wi-Fi network. It allows multimedia service get higher priority. Refers to the acknowledge policy used at the MAC level. Enabling no Acknowledgement can result in more efficient throughput but higher error rates in a noisy Radio Frequency (RF) environment. This is Automatic Power Save Delivery. It saves power. 105