Asus DSL-N12HP users manual in English - Page 51
Apply/Save, To add a filter to allow incoming IP traffic, click
View all Asus DSL-N12HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
To add a filter (to allow incoming IP traffic), click the Add button. On the following screen, enter your filter criteria and then click Apply/Save. Consult the table below for field descriptions. Field Filter Name IP Version Protocol Policy Source IP address Source Port (port or port:port) Destination IP address Destination Port (port or port:port) Description The filter rule label. Select from the drop down menu. TCP, TCP/UDP, UDP, or ICMP. Permit/Drop packets specified by the firewall rule. Enter source IP address. Enter source port number or range. Enter destination IP address. Enter destination port number or range. At the bottom of this screen, select the WAN and LAN Interfaces to which the filter rule will apply. You may select all or just a subset. WAN interfaces in bridge mode or without firewall enabled are not available. 51