Asus P4GE-MX P4GE-MX User Manual E1722 English Edition - Page 48

DRAM RAS# to CAS# Delay [3] Sets the latency between the DRAM active command and the R/W command. Configuration options: [3] [2] DRAM RAS# Precharge [3] Sets the idle clocks after issuing a precharge command to the DRAM. Configuration options: [3] [2] Memory Frequency for [Auto] This item allows you set the FSB and system memory frequency. The default setting is [Auto]. Configuration options: [PC100] [PC133] [Auto] AGP Aperture Size (MB) [64] Sets the size of the AGP aperture. Configuration options: [4] [8] [16] [32] [64] [128] [256] On-Chip Frame Buffer Size [8MB] Sets the frame buffer size. Configuration options: [1MB] [8MB] Init Display First [PCI Slot] Selects which graphics controller to use as the primary boot device. Configuration options: [PCI slot] [Onboard] [AGP] Hyper-Threading Technology [Enabled] Enables or disables the Intel® Hyper-Threading Technology feature. Configuration options: [Disabled] [Enabled] CPU Clock Ratio [8 X] Allows you to key-in the ratio between the CPU core clock and the Front Side Bus (FSB) frequency. To do so, highlight the item then press to display a pop-up menu. Enter a value from the specified range, then press Enter. The configuration option values depend on the CPU installed. Auto Detect PCI Clk [Enabled] Allows you to disable or enable the auto-detect function of the PCI clock. When enabled, the bus speed is calculated based on the capacity of the device installed. CPU Clock [100MHz] This item allows you to set the CPU frequency. To do so, highlight the item then press to display a pop-up menu. Enter a value from the specified range, then press Enter. The configuration option values depend on the CPU installed. 2-16 Chapter 2: BIOS information