Asus P5LD-MR User Manual - Page 137

6.1 RAID driver installation After creating the RAID sets for your server system, you are now ready to install an operating system to the independent hard disk drive or bootable array. This part provides instructions on how to install the RAID controller drivers during OS installation. 6.1.1 Creating a RAID driver disk You can use the original system or use another system to create the RAID driver disk from the system/motherboard support CD or from the Internet. A floppy disk with the RAID driver is required when installing Windows® 2000/2003 server or Red Hat® Enterprise ver. 3.0/SUSE Linux server operating system on a hard disk drive that is included in a RAID set. You can create a RAID driver disk in DOS (using the Makedisk application in the support CD). To create a RAID driver disk in DOS environment: 1. Place the motherboard support CD in the optical drive. 2. Restart the computer, then enter the BIOS Setup. 3. Select the optical drive as the first boot priority to boot from the support CD. Save your changes, then exit the BIOS Setup. 4. Restart the computer. 5. Press any key when prompted to boot from CD. Loading FreeDOS FAT KERNEL GO! Press any key to boot from CDROM... The Makedisk menu appears. A) FreeDOS command prompt B) Create LSIICH7R MegaRAID IDE Driver for Windows 32/64 bit Driver Disk C) Create LSIICH7R MegaRAID IDE Driver for RHEL3 UP6 32/64 bit Driver Disk D) Create LSIICH7R MegaRAID IDE Driver for RHEL4 UP2 32/64 bit Driver Disk E) Create LSIICH7R MegaRAID IDE Driver for SLES9 SP2 32/64 bit Driver Disk F) Create ICH7R Intel Matrix Storage for Windows 32 bit driver disk G) Create ICH7R Intel Matrix Storage for Windows 64 bit driver disk Please choose A To G: 6. Place a blank, high-density floppy disk to the floppy disk drive, then select the type of RAID driver disk you want to create by typing the number before the option. 7. Press . 8. Follow screen instructions to create the driver disk. ASUS P5LD-MR 6-