Asus P5LD-MR User Manual - Page 82

CPU Internal Thermal Control [Auto] Disables or sets the CPU internal thermal control. Configuration options: [Auto] [Disabled] The following item appears only when you installed an Intel® Pentium® 4 processor that supports Hyper Threading Technology. Hyper Threading Technology [Enabled] Allows you to enable or disable the processor Hyper Threading Technology. Configuration options: [Disabled] [Enabled] The following item appears only when you installed an Intel® Pentium® 4 processor that supports Intel® Speedstep technology. Intel(R) SpeedStep Technology [Automatic] Allows you to use the Enhanced Intel SpeedStep® Technology. When set to [Automatic], you can adjust the system power settings in the operating system to use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST. Configuration options: [Automatic] [Disabled] • Refer to the Appendix for details on how to use the EIST feature. • The motherboard comes with a BIOS file that supports EIST. 4.4.5 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press to display the sub-menu. Advanced Chipset Settings DRAM Frequency Configure DRAM Timing by SPD [Auto] [Enabled] Onboard Graphic Adapter Priority [PCI Express/Int-VG] Onboard LAN Boot ROM [Disabled] PEG Port Configuration PEG Port PEG Port VC1 Map PEG Force x1 [Enabled] [TC7] [Disabled] Manual DRAM Frequency Setting or Auto by SPD. DRAM Frequency [Auto] Allows you to manually set the DRAM frequency. Setting to [Auto] allows the BIOS to automatically set the DRAM frequency by Serial Presence Detect (SPD). Configuration options: [Auto] [533 MHz] [667 MHz] 4-22 Chapter 4: BIOS setup