Asus P5M2 User Manual - Page 151

4. The Select New Array screen appears. Use the arrow keys to select Create IS Volume, then press . LSI Logic Config Utility v6.08.05.00 (2006.08.02) Select New Array Type -- SAS1068 Create IM Volume Create Integrated Mirror Array of 2 disks plus an optional hot spare. Data on the primary disk may be migrated. Create IME Volume Create Integrated Mirrored Enhanced Array of 3 to 8 disks including an optional hot spare. ALL Data on array disks will be deleted! Create IS Volume Create Integrated Striping array of 2 to 8 disks. ALL Data on array disks will be deleted! Esc = Exit Menu F1/Shift+1 = Help Enter = Choose array type to create 5. The Create New Array screen shows the disks you can add to make up the IS volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk column. To include this disk in the array, press , , or . LSI Logic Config Utility v6.08.05.00 (2006.08.02) Create New Array -- SAS1068 Array Type: Array Size(MB): IM ------ Slot Device Identifier RAID Hot Drive Pred Size Num Disk Spr Status Fail (MB) 0 SEAGATE ST373454SS 0003 [Yes] [NO 70007 1 SEAGATE ST373454SS 0003 [NO] [NO 70007 2 SEAGATE ST373454SS 0003 [Yes] [NO 35003 3 SEAGATE ST373454SS 0003 [Yes] [NO 35003 Esc = Exit Menu F1/Shift+1 = Help SPACE/+/- = Select disk for array or hot spare C = Create array By default, the RAID Disk field shows No before array creation. This field is grayed out under the following conditions: • The disk does not meet the minimum requirements for use in a RAID array. • The disk is not large enough to mirror existing data on the primary drive. • The disk has been selected as the Hot Spare for the RAID array. • The disk is already part of another array. 5-40 Chapter 5: RAID configuration