Asus P5M2 User Manual - Page 154

Managing hot spares You may configure one disk as a global hot spare to protect critical data on the IM/IME volume(s). You may create the hot spare disk at the same time you create the IM/IME volume. Refer to this section when adding a hot spare on an existing volume. If a disk on IM/IME volume fails, the utility automatically rebuilds the failed disk data on the hot spare. When the failed disk is replaced, the utility assigns the replacement as the new hot spare. To create a hot spare 1. Follow steps 1 ~ 3 of section "Viewing Volume Properties". 2. From the View Array screen, select Manage Array, then press . LSI Logic Config Utility v6.08.05.00 (2006.08.02) View Array -- SAS1068 Array Type Identifier Type Scan Order Size(MB) Status 1 of 1 LSILOGIC Logical Volume 3000 IME 0 51498 Optimal Manage Array Slot Device Identifier RAID Hot Drive Pred Size Num Disk Spr Status Fail (MB) 0 SEAGATE ST373454SS 0003 Yes NO Ok No 34331 2 SEAGATE ST373454SS 0003 Yes NO Ok No 34331 3 SEAGATE ST373454SS 0003 Yes NO Ok No 34331 Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item Alt+N = Next Array C= Create an array 3. From the Manage Array screen, select Manage Hot Spare, then press . LSI Logic Config Utility v6.08.05.00 (2006.08.02) Manage Array -- SAS1068 Identifier Type Scan Order Size (MB) Status LSILOGIC Logical Volume 3000 IME 0 51498 Optimal Manage Hot Spare Synchronize Array Activate Array Delete Array Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item ASUS P5M2 Series 5 - 43