Asus P5M2 User Manual - Page 59
Locator LED 2-pin LOCATORLED1 and 2-pin LOCATORLED2
View all Asus P5M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
14. Auxiliary panel connector (20-pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1 Front Panel SMBus (6-1 pin) These leads connect the front panel SMBus cable. 2 LAN link activity LED (2-pin LAN1_LINKACTLED and 2-pin LAN1_ LINKACTLED) Both of the 2-pin connectors are for the LAN1 and LAN2 Activity LED. Connect the LAN Activity LED cable to this connector. This LED blinks during a network activity and is always lit when linked. 3 Chassis Intrusion connector (4-1pin CASEOPEN) This lead is for a chassis with an intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. The defaults setting is to place one jumper cap over the CASEOPEN and GND leads for disabled this feature. 4 Locator LED (2-pin LOCATORLED1 and 2-pin LOCATORLED2) Both of the 2-pin connector is for the Locator LED 1 and LED 2. Connect the Locator LED cable to this 2-pin connector. This LED lights up when the Locator button is pressed. 5 Locator Button/Switch (2-pin LOCATORBTN) This connector is for the locator button. This button queries the state of the system locator. ASUS P5M2 Series 2 - 37