Asus P5M2 User Manual - Page 46
Keyboard/Mouse power 3-pin KBPWR1, VGA controller setting 3-pin VGA_EN1
View all Asus P5M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3. Keyboard/Mouse power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard/mouse wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar) or use the mouse. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. If you want to power the system on by PS/2 keyboard or mouse, set the jumper KSPWR1 to pin2-3(+5VSB) and enable the option of "Power on By PS/2 Keyboard" or "Power On By PS/2 Mouse" in the BIOS setting. Refer to Section 4.4.9 APM Configuration. 4. VGA controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard ATI® ES1000 PCI VGA controller. Set to pins 1-2 to activate the VGA feature. 2-24 Chapter 2: Hardware information