Home » Asus Manuals » Motherboards » Asus P5QL PRO » Manual Viewer

Asus P5QL PRO User Manual - Page 76

Type [Auto], LBA/Large Mode [Auto], Block Multi-sector Transfer M [Auto], PIO Mode [Auto] - ide not detected

UPC - 610839163731

Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

4.3.4 SATA 1~6 While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press to display the IDE device information. Main BIOS SETUP UTILITY SATA 1 Device : Hard Disk Vendor : ST380817AS Size : 80.0GB LBA Mode : Supported Block Mode : 16Sectors PIO Mode : 4 Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 SMART Monitoring: Supported Select the type of device connected to the system. Type [Auto] LBA/Large Mode [Auto] Block(Multi-Sector Transfer)M [Auto] PIO Mode [Auto] DMA Mode [Auto] SMART Monitoring [Auto] 32Bit Data Transfer [Enabled] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These values are not user-configurable. These items show N/A if no IDE device is installed in the system. Type [Auto] Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate IDE device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive. Configuration options: [Not Installed] [Auto] [CDROM] [ARMD] LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-sector Transfer) M [Auto] Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] 4-14 Chapter 4: BIOS setup

Section	Page
Notices	7
Safety information	8
About this guide	9
P5QL PRO specifications summary	11
Chapter 1: Product introduction	13
1.1 Welcome!	15
1.2 Package contents	15
1.3 Special features	16
1.3.1 Product highlights	16
1.3.2 ASUS unique features	17
1.3.3 ASUS Stylish features	20
1.3.4 ASUS Intelligent Overclocking features	20
Chapter 2: Hardware information	21
2.1 Before you proceed	23
2.2 Motherboard overview	24
2.2.1 Placement direction	24
2.2.2 Screw holes	24
2.2.3 Motherboard layout	25
2.2.4 Layout contents	26
2.3 Central Processing Unit (CPU)	28
2.3.1 Installing the CPU	29
2.3.2 Installing the CPU heatsink and fan	32
2.3.3 Uninstalling the CPU heatsink and fan	33
2.4 System memory	34
2.4.1 Overview	34
2.4.2 Memory configurations	34
2.4.3 Installing a DIMM	39
2.4.4 Removing a DIMM	39
2.5 Expansion slots	40
2.5.1 Installing an expansion card	40
2.5.2 Configuring an expansion card	40
2.5.3 Interrupt assignments	41
2.5.4 PCI slots	42
2.5.5 PCI Express x1 slots	42
2.5.6 PCI Express x16 slot	42
2.6 Jumpers	43
2.7 Connectors	45
2.7.1 Rear panel connectors	45
2.7.2 Internal connectors	47
Chapter 3: Powering up	57
3.1 Starting up for the first time	59
3.2 Turning off the computer	60
3.2.1 Using the OS shut down function	60
3.2.2 Using the dual function power switch	60
Chapter 4: BIOS setup	61
4.1 Managing and updating your BIOS	63
4.1.1 ASUS Update utility	63
4.1.2 Creating a bootable floppy disk	66
4.1.3 ASUS EZ Flash 2 utility	67
4.1.4 AFUDOS utility	68
4.1.5 ASUS CrashFree BIOS 3 utility	70
4.2 BIOS setup program	72
4.2.1 BIOS menu screen	73
4.2.2 Menu bar	73
4.2.3 Navigation keys	73
4.2.4 Menu items	74
4.2.5 Sub-menu items	74
4.2.6 Configuration fields	74
4.2.7 Pop-up window	74
4.2.8 Scroll bar	74
4.2.9 General help	74
4.3 Main menu	75
4.3.1 System Time	75
4.3.2 System Date	75
4.3.3 Legacy Diskette A	75
4.3.4 SATA 1~6	76
4.3.5 Storage Configuration	77
4.3.6 System Information	78
4.4 Ai Tweaker menu	79
4.5 Advanced menu	84
4.5.1 CPU Configuration	85
4.5.2 Chipset	86
4.5.3 Onboard Devices Configuration	87
4.5.4 USB Configuration	88
4.5.5 PCI PnP	89
4.6 Power menu	90
4.6.1 Suspend Mode	90
4.6.2 ACPI 2.0 Support	90
4.6.3 ACPI APIC Support	90
4.6.4 APM Configuration	91
4.6.5 Hardware Monitor	92
4.7 Boot menu	93
4.7.1 Boot Device Priority	94
4.7.2 Boot Settings Configuration	95
4.7.3 Security	96
4.8 Tools menu	98
4.8.1 ASUS EZ Flash 2	99
4.8.2 Express Gate	99
4.8.3 AI NET 2	100
4.8.4 ASUS O.C. Profile	100
4.9 Exit menu	102
Chapter 5: Software support	103
5.1 Installing an operating system	105
5.2 Support DVD information	105
5.2.1 Running the support DVD	105
5.2.2 Drivers menu	106
5.2.3 Utilities menu	107
5.2.4 Manual menu	109
5.2.5 ASUS Contact information	110
5.2.6 Other information	111
5.3 Software information	113
5.3.1 ASUS MyLogo2™	113
5.3.2 Audio configurations	115
5.3.3 ASUS PC Probe II	119
5.3.4 ASUS AI Suite	125
5.3.5 ASUS AI Booster	127
5.3.6 ASUS AI Nap	128
5.3.7 ASUS Fan Xpert	129
5.3.8 ASUS EPU-4 Engine	130
5.3.9 ASUS Express Gate	134
Appendix: CPU features	143
A.1 Intel® EM64T	145
Using the Intel® EM64T feature	145
A.2 Enhanced Intel SpeedStep® Technology (EIST)	145
A.2.1 System requirements	145
A.2.2 Using the EIST	146
A.3 Intel® Hyper-Threading Technology	147

Match case Limit results 1 per page

4-14

Chapter 4: BIOS setup

4.3.4

SATA 1~6

While entering Setup, the BIOS automatically detects the presence of IDE devices.

There is a separate sub-menu for each IDE device. Select a device item then

press

<Enter>

to display the IDE device information.

The BIOS automatically detects the values opposite the dimmed items (Device,

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and

SMART Monitoring). These values are not user-conﬁgurable. These items show

N/A

if no IDE device is installed in the system.

Type [Auto]

Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the

appropriate IDE device type. Select [CDROM] if you are speciﬁcally conﬁguring a

CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is

either a ZIP, LS-120, or MO drive.

Conﬁguration options: [Not Installed] [Auto] [CDROM] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled. Conﬁguration options: [Disabled] [Auto]

Block (Multi-sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data

transfer from and to the device occurs multiple sectors at a time if the device

supports multi-sector transfer feature. When set to [Disabled], the data transfer

from and to the device occurs one sector at a time.

Conﬁguration options: [Disabled] [Auto]

PIO Mode [Auto]

Selects the PIO mode.

Conﬁguration options: [Auto] [0] [1] [2] [3] [4]

Select Screen

Select Item

Change Option

General Help

F10

Save and Exit

ESC

Exit

BIOS SETUP UTILITY

Main

SATA 1

Device

: Hard Disk

Vendor

: ST380817AS

Size

: 80.0GB

LBA Mode

: Supported

Block Mode

: 16Sectors

PIO Mode

: 4

Async DMA

: MultiWord DMA-2

Ultra DMA

: Ultra DMA-5

SMART Monitoring: Supported

Type

[Auto]

LBA/Large Mode

[Auto]

Block(Multi-Sector Transfer)M[Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

Select the type of

device connected to

the system.