Asus PRL-DLS PRL-DLS User Manual - Page 24

1.4.2 Core specifications 1 604-pin CPU sockets. A 604-pin surface mount, Zero Insertion Force (ZIF) socket for the Intel® Xeon™ and Intel® Gallatin™ processors with 512KB L2 cache and a 533MHz or a 400MHz system bus that allows up to 3.2GB/s data transfer rate. 2 8-pin 12V SSI power connector. This power connector is for an ATX power supply. 24/20-pin ATX power connector. This power connector is for an ATX power supply. 3 ServerWorks® Grand Champion SuperLite north bridge CMICSL. The Champion Memory and I/O Controller SuperLite (CMICSL) acts as the host bridge of the Grand Champion SuperLite (GCSL) SystemSet. The GCSL device interfaces directly to the processor bus, and integrates the functions of the main memory controller and the Inter Module Bus (IMB) interface unit. The processor interface supports a 400MHz Front Side Bus (FSB) providing a 3.2GB/s bandwidth, memory bandwidth with up to 4GB registered ECC PC2100/1600 DDR DIMMs, and two high speed IMBs plus one thin IMB to connect to the south bridge CSB6. 4 DIP switches. This 5-switch Dual Inline Package (DIP) allows you to set the CPU external frequency. 5 DDR DIMM sockets. These four 184-pin DIMM sockets support up to 4GB system memory using registered ECC PC2100/1600 DDR DIMMs. 6 Floppy disk connector. This connector accommodates the provided ribbon cable for the floppy disk drive. One side of the connector is slotted to prevent incorrect insertion of the floppy disk cable. 7 ServerWorks® South Bridge, CSB6 performs as a PCI to LPC (Low Pin Count) Bridge and integrates PCI master/slave functions, DMA controller, ATA100 IDE interface, USB contoller, SMBus host, ACPI and other integral functions. 8 IDE connectors. These dual-channel bus master IDE connectors support up to four Ultra DMA/100/66, PIO Modes 3 & 4 IDE devices. Both the primary (blue) and secondary (blue) connectors are slotted to prevent incorrect insertion of the IDE ribbon cable. 1-8 Chapter 1: Product introduction