Asus PRL-DLS PRL-DLS User Manual - Page 44
Jumpers
View all Asus PRL-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2.7.2 Jumpers 1. SCSI setting (2-pin JSCI1) This jumper allows you to enable or disable the onboard SCSI feature. Keep the jumper open if you wish to install SCSI devices. Place a cap on the jumper to disable the onboard SCSI controller. PRL-DLS ® JSCSI1 32 21 Disable PRL-DLS LSI 1010R SCSI Chip Setting Enable (Default) 2. Fast Ethernet setting (2 x 3-pin JLAN1, JITLLAN1) These jumpers are set by default, pins [1-2], to enable the onboard INTEL 82540 Fast Ethernet controller to support 10/100/1000BASE-TX networking. Reset to pins 2-3 to disable the controller. PRL-DLS ® JLAN1 32 21 Disable Enable (Default) PRL-DLS Intel 82540 LAN Chip Setting 2-16 Chapter 2: Hardware information
2-16
Chapter 2: Hardware information
2.
Fast Ethernet setting (2 x 3-pin JLAN1, JITLLAN1)
These jumpers are set by default, pins [1-2], to enable the onboard
INTEL 82540 Fast Ethernet controller to support 10/100/1000BASE-TX
networking.
Reset to pins 2-3 to disable the controller.
PRL-DLS
PRL-DLS Intel 82540 LAN Chip Setting
(Default)
Enable
Disable
3
2
1
2
JLAN1
1.
SCSI setting (2-pin JSCI1)
This jumper allows you to enable or disable the onboard SCSI feature.
Keep the jumper open if you wish to install SCSI devices. Place a cap
on the jumper to disable the onboard SCSI controller.
PRL-DLS
PRL-DLS LSI 1010R SCSI Chip Setting
JSCSI1
(Default)
Enable
Disable
3
2
1
2
2.7.2
Jumpers