Asus PRL-DLS PRL-DLS User Manual - Page 97
Quick Power On Self Test [Enabled], Boot Up Floppy Seek [Enabled], Post Diag [Disabled]
View all Asus PRL-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Reset Configuration Data [No] The Extended System Configuration Data (ESCD) contain information about non-PnP devices. It also holds the complete record of how the system was configured the last time it was booted. Select [Yes] if you want to clear these data during the Power-On-Self-Test (POST). Configuration options: [No] [Yes] MPS 1.4 Support [Enabled] This field allows you to enable or disable the MultiProcessor Specification 1.4 support. Configuration options: [Disabled] [Enabled] Quick Power On Self Test [Enabled] This field speeds up the Power-On-Self Test (POST) routine by skipping retesting a second, third, and fourth time. Configuration options: [Disabled] [Enabled] Boot Up Floppy Seek [Enabled] When enabled, the BIOS will seek the floppy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled] Post Diag [Disabled] Configuration options: [Disabled] [Enabled] ASUS PRL-DLS motherboard user guide 4-29