Asus RS100-E11-PI2 RS100-E10-PI2 User Manual - Page 113
Network Stack Configuration, USB Mass Storage Driver Support [Enabled]
View all Asus RS100-E11-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
USB Mass Storage Driver Support [Enabled] Allows you to enable or disable USB Mass Storage driver support. Configuration options: [Disabled] [Enabled] USB hardware delays and time-outs USB transfer time-out [20 sec] Allows you to set the time-out value for Control, Bulk, and Interrupt transfers. Configuration options: [1 sec] [5 sec] [10 sec] [20 sec] Device reset time-out [20 sec] Allows you to set the device reset time-out value. Configuration options: [10 sec] 20 sec] [30 sec] [40 sec] Device power-up delay [Auto] Allows you to set the maximum time the device takes before the device reports itself to the host controller properly. [Auto] uses default value; for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor. Configuration options: [Auto] [Manual] The following item appears only when Device power-up delay is set to [Manual]. Device power-up delay in seconds [5] Allows you to set the device power-up delay in seconds. Use the or to adjust the value. The values range from 1 to 40. Mass Storage Devices Allows you to select the mass storage device emulation type for devices connected. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM] 5.5.13 Network Stack Configuration Allows you to configure the network stack configuration. Network Stack [Enabled] Allows you to enable or disable UEFI Network Stack. Configuration options: [Disabled] [Enabled] ASUS RS100-E11-PI2 5-31