Asus RS100-E11-PI2 RS100-E10-PI2 User Manual - Page 114
CSM (Compatibility Support Module), Launch CSM [Disabled]
View all Asus RS100-E11-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
The following items appear only when Network Stack is set to [Enabled]. Ipv4 PXE Support [Disabled] Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] Ipv4 HTTP Support [Disabled] Enables or disables the Ipv4 HTTP Boot Support. If disabled, Ipv4 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] Ipv6 PXE Support [Disabled] Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] Ipv6 HTTP Support [Disabled] Enables or disables the Ipv6 HTTP Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] PXE boot wait time [0] Set the wait time to press ESC key to abort the PXE boot. Use the or to adjust the value. The values range from 0 to 5. Media detect count [1] Set the number of times presence of media will be checked. Use the or to adjust the value. The values range from 1 to 50. 5.5.14 CSM (Compatibility Support Module) Launch CSM [Disabled] This option allows you to enable or disable CSM Support. [Disabled] Disable the CSM to fully support the Windows secure update and secure boot. [Enabled] For a better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows UEFI mode. 5-32 Chapter 5: BIOS Setup