Asus RS100-E11-PI2 RS100-E10-PI2 User Manual - Page 37
Installing 2.5-inch SSDs on HDD bay 2 (Optional), assembly to HDD bay 2 and set aside.
View all Asus RS100-E11-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2.4.3 Installing 2.5-inch SSDs on HDD bay 2 (Optional) To replace an installed 3.5-inch Serial ATA HDD with two 2.5-inch SSDs in HDD bay 2: 1. Locate the 3.5-inch Serial ATA HDD and the HDD drive tray assembly in the chassis. 2. Disconnect the SATA cable and power cable from the 3.5-inch SATA HDD. 3. Release the four screws that secure the HDD drive tray and 3.5-inch SATA HDD assembly to HDD bay 2 and set aside. 4. Remove the HDD drive tray and set aside. ASUS RS100-E11-PI2 2-19
2-19
ASUS RS100-E11-PI2
2.4.3
Installing 2.5-inch SSDs on HDD bay 2 (Optional)
To replace an installed 3.5-inch Serial ATA HDD with two 2.5-inch SSDs in HDD bay 2:
1.
Locate the 3.5-inch Serial ATA HDD and the HDD drive tray assembly in the chassis.
2.
Disconnect the SATA cable and power cable from the 3.5-inch SATA HDD.
3.
Release the four screws that secure the HDD drive tray and 3.5-inch SATA HDD
assembly to HDD bay 2 and set aside.
4.
Remove the HDD drive tray and set aside.