Asus RS100-E11-PI2 RS100-E10-PI2 User Manual - Page 76
Fan connectors 4-pin CPU_FAN1, FRNT_FAN1-4, REAR_FAN1, Serial port connector 10-1 pin COM1
View all Asus RS100-E11-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
7. Fan connectors (4-pin CPU_FAN1, FRNT_FAN1-4, REAR_FAN1) The fan connectors support cooling fans. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. • These are not jumpers! DO NOT place jumper caps on the fan connectors! • All fans feature the ASUS Smart Fan technology. 8. Serial port connector (10-1 pin COM1) These connectors are for the serial (COM) ports. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis. The COM module is purchased separately. 4-18 Chapter 4: Motherboard Information