Asus RS100-E11-PI2 RS100-E10-PI2 User Manual - Page 31
ASUS RS100-E11-PI2, bay 1 using the screws removed
View all Asus RS100-E11-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
8. Place and orient the HDD drive tray and 3.5-inch SATA HDD assembly as shown. 9. Connect the SATA signal cable and the power cable from the power supply to the 3.5-inch HDD. Use an L-type SATA connector to connect the 3.5-inch SATA HDD to the motherboard. 10. Secure the 3.5-inch SATA HDD and HDD drive tray assembly to the HDD bay 1 using the screws removed in step 2. Ensure that the HDD drive tray is seated securely in place. 11. Install the previously removed USB cable to the motherboard. ASUS RS100-E11-PI2 2-13
2-13
ASUS RS100-E11-PI2
Use an L-type SATA connector to
connect the 3.5-inch SATA HDD to
the motherboard.
9.
Connect the SATA signal cable and
the power cable from the power
supply to the 3.5-inch HDD.
8.
Place and orient the HDD drive tray
and 3.5-inch SATA HDD assembly
as shown.
10.
Secure the 3.5-inch SATA HDD and
HDD drive tray assembly to the HDD
bay 1 using the screws removed in
step 2.
Ensure that the HDD drive tray is
seated securely in place.
11.
Install the previously removed USB cable to the motherboard.