Asus TRL-DLS TRL-DLS User Manual - Page 16

Hardware Setup Procedure, Jumper Settings

Get Asus TRL-DLS PDF manuals and user guides View all Asus TRL-DLS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

3. HARDWARE SETUP 3.3 Hardware Setup Procedure Complete the following steps before using your computer: 1. Check motherboard settings 2. Install memory modules 3. Install the Central Processing Unit (CPU) 4. Install a CPU terminator, if you installed only one CPU. 5. Install Expansion Cards 6. Connect ribbon cables, panel wires, and power supply cables 7. Configure the BIOS parameter settings Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any internal component. 2. Use a grounded wrist strap or touch a safely grounded object, such as the power supply case, before handling components to avoid damaging them due to static electricity. 3. Hold components by the edges and do not touch the ICs on them. 4. Whenever you uninstall any component, place the components on a grounded antistatic pad or in the bag that came with the component. 5. Before you install or remove any component, ensure that theATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 3.4 Jumper Settings There is only one jumper on the motherboard. This jumper allows you to set the speed for the PCI slots. 3. H/W SETUP Jumper ® TRL-DLS TRL-DLS PCI Slot Setting P1_66EN 12 23 Normal (Default) Force 33Mhz 16 ASUS TRL-DLS User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
16
ASUS TRL-DLS User’s Manual
3. HARDWARE SETUP
Jumper
3. H/W SETUP
3.3
Hardware Setup Procedure
Complete the following steps before using your computer:
1.
Check motherboard settings
2.
Install memory modules
3.
Install the Central Processing Unit (CPU)
4.
Install a CPU terminator, if you installed only one CPU.
5.
Install Expansion Cards
6.
Connect ribbon cables, panel wires, and power supply cables
7.
Configure the BIOS parameter settings
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1.
Unplug the power cord from the wall socket before touching any internal
component.
2.
Use a grounded wrist strap or touch
a safely grounded object, such as the
power supply case, before handling components to avoid damaging them
due to static electricity.
3.
Hold components by the edges and do not touch the ICs on them.
4.
Whenever you uninstall any component, place the components on a grounded
antistatic pad or in the bag that came with the component.
5.
Before you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from the power
supply.
Failure to do so may cause severe damage to the motherboard,
peripherals, and/or components.
3.4
Jumper Settings
There is only one jumper on the motherboard. This jumper allows you to set the
speed for the PCI slots.
TRL-DLS
P1_66EN
Normal
(Default)
Force 33Mhz
TRL-DLS PCI Slot Setting
12
23