Asus TRL-DLS TRL-DLS User Manual - Page 27
SCSI Connection Notes
View all Asus TRL-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3. HARDWARE SETUP 6) Two 68-pin Ultra160 SCSI Connectors (CHA-WIDE, CHB-WIDE) This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the two channels. Each channel can support a maximum of 15 devices as specified by Ultra160 standards. ® TRL-DLS SCSI-A 68-Pin Ultra160/ 1 35 Ultra2-Wide SCSI Connector 34 1 68 35 3. H/W SETUP Connectors SCSI-B 68-Pin Ultra160/ Ultra2-Wide SCSI Connector 34 68 TRL-DLS Onboard SCSI Connectors SCSI Connection Notes This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the two channels. The onboard SCSI chipset incorporates an advanced multimode I/O cell that supports both single-ended (SE), Ultra2, and Ultra160 devices. With Ultra160 devices, the SCSI bus platform performs at full Ultra160 speeds (up to 160MB/sec) and extended cabling 12m (or 25m in a point-to-point configuration). When an SE device is attached, the bus defaults to an SE speed and 1.5m cable length. IMPORTANT: Connect SCSI devices as shown. Each channel should have only one type of SCSI standard (e.g. Ultra160, Ultra2, Ultra-Wide). Mixing SCSI devices on the same channel decreases performance of the slower device. 68-pin Internal SCSI Cable (Twisted-Pair Ribbon) Channel A ® TRL-DLS Internal SCSI Devices (up to 15 devices) 68-pin Female Terminator 68-pin Internal SCSI Cable (Twisted-Pair Ribbon) Channel B Internal SCSI Devices (up to 15 devices) TRL-DLS SCSI Connection Example 68-pin Female Terminator NOTE: Ultra160 SCSI devices do not have termination jumpers and must use a separate terminator on the last connector (internal) or device (external). ASUS TRL-DLS User's Manual 27