Asus TRL-DLS TRL-DLS User Manual - Page 17

System Memory

Get Asus TRL-DLS PDF manuals and user guides View all Asus TRL-DLS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

3. H/W SETUP System Memory 3. HARDWARE SETUP 3.5 System Memory This motherboard uses interleaved PC133 Dual Inline Memory Modules (DIMMs). Six DIMM sockets are available for 3.3Volt (power level) registered Synchronous Dynamic Random Access Memory (SDRAM) of 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, or 1GB densities with Serial Presence Detect (SPD) and Error Check and Correction (ECC). The motherboard supports system memory of up to 6GB in a two-way interleaved configuration. This configuration requires that you install identical DIMMs (exactly the same type and size) in pairs. For example, if you installed a 512MB module into DIMMA1, you must install the same type of 512MB module into DIMMB1. The same rule applies to pairs DIMMA2/DIMMB2 and DIMMA3/DIMMB3. The following table lists the DIMM socket pairs and the memory modules you can install. 3.5.1 Memory Configurations DIMM Socket 168-pin DIMM DIMMB1 SDRAM 128MB, 256MB, 512MB, 1GB DIMMA1 SDRAM 128MB, 256MB, 512MB, 1GB DIMMB2 SDRAM 128MB, 256MB, 512MB, 1GB DIMMA2 SDRAM 128MB, 256MB, 512MB, 1GB DIMMB3 SDRAM 128MB, 256MB, 512MB, 1GB DIMMA3 SDRAM 128MB, 256MB, 512MB, 1GB Total System Memory (Max. 6GB) Total Memory x1 x1 x1 x1 x1 x1 = IMPORTANT: The system chipset only supports 64Mbit, 128Mbit, and 256Mbit "registered" SDRAMs with ECC. Make sure to use only the specified DIMM types for smooth system operation. ASUS TRL-DLS User's Manual 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
ASUS TRL-DLS User’s Manual
17
3. HARDWARE SETUP
System Memory
3. H/W SETUP
3.5
System Memory
This motherboard uses interleaved PC133 Dual Inline Memory Modules (DIMMs).
Six DIMM sockets are available for
3.3Volt
(power level) registered Synchronous
Dynamic Random Access Memory (SDRAM) of 16MB, 32MB, 64MB, 128MB,
256MB, 512MB, or 1GB densities with Serial Presence Detect (SPD) and Error
Check and Correction (ECC).
The motherboard supports system memory of up to 6GB in a two-way interleaved
configuration. This configuration requires that you install identical DIMMs (exactly
the same type and size) in pairs. For example, if you installed a 512MB module into
DIMMA1, you must install the same type of 512MB module into DIMMB1. The
same rule applies to pairs DIMMA2/DIMMB2 and DIMMA3/DIMMB3.
The following table lists the DIMM socket pairs and the memory modules you can
install.
3.5.1
Memory Configurations
DIMM Socket
168-pin DIMM
Total Memory
DIMMB1
SDRAM 128MB, 256MB, 512MB, 1GB
x1
DIMMA1
SDRAM 128MB, 256MB, 512MB, 1GB
x1
DIMMB2
SDRAM 128MB, 256MB, 512MB, 1GB
x1
DIMMA2
SDRAM 128MB, 256MB, 512MB, 1GB
x1
DIMMB3
SDRAM 128MB, 256MB, 512MB, 1GB
x1
DIMMA3
SDRAM 128MB, 256MB, 512MB, 1GB
x1
Total System Memory (Max. 6GB)
=
IMPORTANT:
The system chipset only supports 64Mbit, 128Mbit, and 256Mbit
“registered” SDRAMs with ECC. Make sure to use only the specified DIMM
types for smooth system operation.