Belkin F1DP108A User Manual - Page 46
Troubleshooting
UPC - 722868564004
View all Belkin F1DP108A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Troubleshooting My server does not boot when connected to the SMB CAT5 KVM Switch but works fine when I connect the keyboard, video, and mouse directly to 1 the server. 2 • Make sure that the keyboard and mouse cables are connected tightly between the Server Interface Module and the server. • Check that the keyboard and mouse cables are not crossed. 3 • Check the CAT5 cable connection. 4 I am getting ghosting, shadowing, or fuzzy images on my monitor. • Check that all video cables are inserted properly to the Server 5 Interface Module. • Check that the monitor you are using supports the resolution and refresh-rate setting on your server. 6 • Lower the video resolution of your monitor. • Check that the cable length does not exceed 100 feet (30m). 7 • Check that the graphics card you are using supports the resolution and refresh-rate setting on your server. • Connect the monitor directly into the server you are having trouble with to see 8 if the problem still appears. I am getting a black screen on my monitor. • Check that all video cables are inserted properly. • Check that the keyboard cable is connected and inserted properly between the server and the Server Interface Module for the appropriate port. • Connect your monitor directly to the server to verify that your monitor is functioning properly. section 43