BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector MW860USTi User Manual
BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector Manual
View all BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector manual content summary:
- BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 1
MP780 ST+/MW860USTi Digital Projector User Manual - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 2
Q Presenter 68 PointDraw™ Pen 2.0 70 Shutting down the projector 75 Menu operation 76 Maintenance 90 Care of the projector 90 Lamp information 91 Troubleshooting......... 97 Specifications 98 Dimensions 99 Ceiling mount installation 100 Timing chart 101 Warranty and Copyright information - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 3
and marked on the product. Safety Instructions 1. Please read this manual before 4. you operate your projector. Save it for future reference. Always open the lens shutter or remove the lens cap when the projector lamp is on. 5. In some countries, the line voltage is 2. Do not look straight - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 4
you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 5
Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. the following environments. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector. - Locations where - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 6
may cause it to fail. If the resulting in damage to the projector. projector does become wet, disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 17. Do not step on the projector or place any objects upon it. Besides probable physical damage to the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 7
to 1 projector) • Remote desktop feature for LAN and USB display 1-M (maximum 1PC/ NB can display to 8 projectors at the same time) • USB display supports computer connection balance control for data/video display • High brightness projection lamp • Multi-language On-Screen Display (OSD) menus • - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 8
detailed information. MP780 ST+ projector MW860USTi projector Remote control with batteries QDiugiictkal SPtraortjeGctuoirde Power cord VGA cable Quick start guide User manual CD Warranty card* *Q Presenter cannot be used together with Q Draw interactive software. PointDraw™ pen 2.0 USB - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 9
start guide Q Draw 2.0 interactive software* You may enjoy the dual pen feature by using two PointDraw pen 2.0 and the Q Draw 2.0 interactive software provided. Optional accessories 1. Spare lamp kit 2. Ceiling mount kit 3. RS232 cable 4. BenQ wireless dongle 5. PointDraw pen 2.0 6. Wall mount - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 10
8 (MW860USTi) 1 2 3 5 4 6 7 8 Rear/lower side 9 10 11 12 13 14 15 16 17 18 19 1. External control panel (See "Projector" on page 11 for details.) 2. Lamp cover -B type jack 22. Kensington anti-theft lock slot 23. Ceiling mount holes 24. 12V DC output terminal Used to trigger external devices such - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 11
keys ( / Up, / 9. Down) Manually corrects distorted images resulting from an angled projection. indicator light Lights up red if the projector's temperature becomes too high. See " LAMP indicator light Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 12
your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling or wall, we strongly recommend that you use a proper fitting BenQ projector ceiling mount kit or wall mount kit and that you ensure it is securely and safely installed. If you use - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 13
Displays S-video signal. 4. MENU/EXIT Displays the test pattern. See "Test Pattern" on page 78 for details. Turns on the On-Screen Display (OSD) 14. OFF menu. Goes back to previous OSD menu, exits and saves menu settings. See "Using Turns off the projector. See "Shutting the menus" on page 34 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 14
pointer light for presentation purposes. 21. VOLUME+/VOLUMEAdjusts the projector's sound level. See Operating the LASER pointer The Laser Pointer visible. It is necessary to press and hold LASER for continuous output. Toggles projector audio between on and off. See "Muting the sound" on page 48 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 15
sensor on the projector that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the rear manufacturer. • Dispose of the used battery according to the battery manufacturer's instructions. • Never throw a battery into a fire. There may be danger - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 16
quick setup and portability. 2. Front Ceiling Select this location with the projector suspended upsidedown from the ceiling in front of the screen. Purchase the BenQ Projector Ceiling Mounting Kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in the SYSTEM SETUP: Basic - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 17
projections (or projecting onto angled surfaces). If the projector is mounted on a ceiling, it must be mounted upside-down so that it projects at a slightly projection distance. BenQ has provided a table of screen sizes to assist you in determining the ideal location for your projector. There - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 18
make note of the "Vertical offset (mm)" value. This will determine the final placement of the screen in relation to the horizontal plane of the projector. For example, if you are using the MP780 ST+ and your measured projection distance is 2.0 m (2000 mm), the closest match in the column is 1616 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 19
Vertical offset (mm) 88 110 132 176 220 264 330 440 550 660 MW860USTi Screen size Diagonal W H Distance from screen (mm) Inch mm (mm) BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 20
it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location. 20 Positioning your projector - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 21
cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • For detailed connection methods, see pages 23-29. 23 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 22
Computer system requirements for USB display:: Operation System Requirements Windows XP Windows Vista Minimum Hardware Requirements Supports USB 2.0 CPU: Pentium 1G RAM: 512MB RAM Disk: 20MB hard driver space Computer system requirements for WiFi display:: Operation System Requirements Windows - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 23
speaker will be muted when the AUDIO OUT jack is connected. To connect the projector to a notebook or desktop computer (using USB): 1. Take a USB mini-B Connect the other end of the cable to the MINI-B jack on the projector. • It may take several seconds to successfully display the screen for the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 24
2. Connect the other end of the cable to the HDMI jack on the projector. • Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 25
on the screen, you can connect the MONITOR OUT signal output jack on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 23. 2. Take a suitable VGA cable - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 26
a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below: Terminal name HDMI Terminal appearance Reference HDMI "Connecting an HDMI source device" on page - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 27
Connecting an HDMI source device The projector provides an HDMI input jack that allows you to connect it to an HDMI source device like a DVD player, a DTV tuner, a display or a notebook computer. HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 28
details. The built-in speaker will be muted when the AUDIO OUT jack is connected. If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 29
details. The built-in speaker will be muted when the AUDIO OUT jack is connected. • If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 30
it could become deformed due to the heat produced by the projection lamp. MP780 ST+ MW860USTi 3. Press II Power on the projector or ON on the remote control to start the projector. The POWER indicator light flashes and stays green when the projector is on. The start up procedure takes about 10-20 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 31
your OSD language following the onscreen instructions. 5. If you are prompted for a password, press the arrow keys to enter a six digit password. See "Utilizing the password function" on page 35 for details. 6. Switch all of the connected equipment on. 7. The projector will start to search for input - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 32
or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 33 for details. • Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 33
image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 34
the OSD menu Language and press / to on. select a preferred language. 2. Use / to highlight the SYSTEM SETUP: Basic menu. 4. Press MENU/EXIT twice* on the projector or remote control to leave and save the settings. *The first press leads you back to the main menu and the second press closes the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 35
if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set, the projector cannot be used unless the correct password is entered every time the projector is started. 1. Open the OSD menu and go to - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 36
projector or remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service . Write your selected password down here in this manual in advance or right after the password is entered - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 37
SOURCE menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or remote control. A source selection bar displays. 2. Press / until your - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 38
press MODE/ENTER to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. 6. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 7. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/ out - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 39
ratio' is the ratio of the image width to the image height. With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal. To change the projected image ratio - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 40
. To select an operation mode that suits your need, you can follow one of the following steps. • Press MODE/ENTER on the remote control or projector repeatedly until your desired mode is selected. • Go to the PICTURE > Picture Mode menu and press / to select a desired mode. The picture modes are - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 41
projected pictures. To use this function, go to the DISPLAY > Wall Color menu and press / to select a color which is the can make adjusents tothese functions by highlighting them and pressing / on the projector or remote control Adjusting Brightness The higher the value, the brighter the image - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 42
independently adjust its range and saturation according to your preference. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the screen and enter - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 43
2. Press MODE/ENTER and the 3D Color Management page displays. 3. Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta. 4. Press to highlight Hue and press / to select its range. Increase in the range will include colors consisted of more - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 44
startup screen In addition to selecting the projector preset startup screen from among BenQ logo, Black or Blue screen, you can CAPTURE or MODE/ENTER again. 4. The message 'Screen Capturing...' displays while the projector is processing the image. Please wait. 5. If the action is successful, you - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 45
Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ENTER to - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 46
Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connecting a computer" on page 23 for details. You can operate your display software program (on a connected PC) which responds to page up/down commands (like Microsoft - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 47
Installation or FAQ-Features and Service based on the information you want to know. 3. Press MODE/ENTER. 4. Press / to select a problem and press MODE/ENTER for possible solutions. 5. Press MENU/EXIT to exit the OSD. Locking control keys With the control keys on the projector locked, you can prevent - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 48
is between 0°C-35°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: 1. Press MENU/EXIT and then press - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 49
section. 2. Highlight Microphone volumee and select a desired sound level. Microphone sound will still function even though Mute is activated. Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 50
the value. 5. Press to highlight Apply and press MODE/ENTER. Configuring the Wireless LAN Settings 1. Connect the BenQ wireless dongle (optional) to the USB TYPE-A input jack of the projector. 2. Highlight Wireless LAN in SYSTEM SETUP: Advanced > Network Settings menu and press MODE/ENTER. 3. For AP - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 51
is on the same local area network to control the projector. 1. Enter the address of the projector in the address bar of your browser and press Enter. For example: http://10.60.7.31 2. The BenQ remote network operation page opens. • The web page control supports IE version 7.0 or higher. Operation 51 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 52
, Q Presenter and USB Reader sections are for the purpose of explanation and may differ from the actual design of your projector. 3. Click Download to save Q Presenter software on your computer. You can also link to the web page control from Q Presenter > Settings > Advanced Setting > Control - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 53
same as the ones on the remote control. See "Remote control" on page 13 for details. The Display Setting page allows you to operate the projector as if you were using the OSD menus. These functions are some useful menu settings. The Picture Setting page allows you to manage the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 54
Control page allows you to control computer's display status of all the computers linked to this projector. The Crestron page is only available when you are on a Wired LAN network. It also allows you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9. 54 Operation - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 55
. ii. To switch input source, click on your desired signal. iii. You can select a preferred OSD language. The tools page allows you to manage the projector, configure the LAN control settings and secure access of remote network operation on this - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 56
the person in charge of it. ii. You can adjust the Wired LAN settings. iii. Once set, access to the remote network operation on this projector has been password-protected. iv. Once set, access to the tools page has been password-protected. After making the adjusents, press the Send button and - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 57
The Basic page allows you to change the password and select connected persons. The number of connected persons may affect the network display performance. Operation 57 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 58
The Wired LAN page allows you to adjust the Wired LAN settings. The Wireless LAN page allows you to adjust the Wirless LAN settings. Max. length for SSID string is 16 bytes. Please use a different SSID when more than two projectors are connecting through wireless LAN. 58 Operation - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 59
The Mail page allows you to send alert e-mail to your ITS administrator. You can first try the Mail Test function to check if the Alert Mail works. Operation 59 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 60
to the network display via local network connection. Be sure to turn off other virtual network control programs before using Q Presenter. 1. Connect the projector with the RJ45 cable, and make sure your laptop or computer also link to the LAN. See "Configuring the Wired LAN Settings" on page - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 61
.. The Special Feature page allows you to have some advanced functions to manage the display image on your projector. i ii iii i. Full Screen: whole image display on the projector. Selectable: a square will popup then you can move and drag the area you want to show the audience. Operation 61 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 62
ii. You can select to stop/start displaying desktop contents to connected network display. iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click the location you want to display. 4locations can be chosen (1-4) or 2 places (L and R) if it's 2 computers. Once you click - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 63
automatically open the Q Presenter application when the computer is powered on. x. Once set, press Apply to save the changes. xi. You can link to the BenQ remote network operation page on page 51. Operation 63 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 64
Login Code This function is designed to ensure network display through the correct projector. To toggle this function: 1. Go to the SYSTEM SETUP: Advanced press / to select On or Off. When this function is on, the projector generates a random 4-digit code in the upper right corner when you switch the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 65
A square box will display on the filename for unidentified characters. • Thai filename is not supported. • Files in GIF, TIFF, PNG and BMP formats can be displayed for the file to the USB flash drive. 2. Turn on your projector if needed. 3. Remove the USB flash drive from your computer and plug it into - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 66
ii. Selected folder iii. Supported file format iv. Unsupported file format To open folder scroll through thumbnails return to a previous page exit USB Reader change to a different page go back - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 67
start/stop slideshow Settings page: Enter i ii iii iv i. You can adjust order settings. ii. You can adjust Slideshow settings. iii. Press OK to save the settings. iv. Press Cancel to ignore the change. Operation 67 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 68
Remote Desktop Control through Q Presenter The Q Presenter can proceed the Remote Desktop Control (RDC) the host PC from projector site. 1. Setup the RDC login account (User name and Password ) in Q Presenter. • Name: must be 8 English capital letters A~Z and number 0 ~9. • Password: must be 6 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 69
and press MODE/ENTER to connect the selected PC. 7. Connect USB keyboard or mouse to control the host PC's desktop through the projector. • Remote Desktop Control does not support PC Standby mode. • Remote Desktop Control only supports LAN source so the projector source is fixed on LAN. Operation 69 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 70
is charging. • Do not disassemble the PointDraw™ pen yourself. Refer all servicing to qualified service personnel. • The lithium battery is only rechargeable, and not user replaceable. Not user serviceable. 2. Connect the projector and your computer with the supplied USB B type to A type cable - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 71
How to hold the PointDraw™ pen 2.0 You can hold the PointDraw™ the way you would hold a normal pencil or pen, or you can hold it like a remote control - use in whichever position is most comfortable. or If the PointDraw™ pen is far away from the screen, be sure to press the left mouse button to - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 72
Blinking: Attempt to pair with the projector Sensor Projector's On/Off switch Dual Pen operation Now, MP780 ST+/MW860USTi is ready for PointDraw™ pen 2.0 and support up to two pens. For Installing Q Draw software 1. Please ensure the BenQ projector is connected with the computer. 2. Please - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 73
software for dual pen feature activation. When switching between PointDraw™ modes, it will take about 30 seconds to re-flash modes, the delay time depends on computer response time. Troubleshooting only part of the screen, make sure your projector is displaying the computer's screen and not some - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 74
problem between the tip and the cursor on your Apple computers, install the scaling fix that came with the user manual CD-ROM: i. Mount the "ScalingFix.dmg" disk image - just double-clicking the file should auto-mount Operation frequency Rechargeable battery Model name Normal voltage Normal - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 75
't respond in a few seconds, the message will disappear. If you use the remote control, press OFF to shut down the projector. 2. Press II Power on the projector a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run to cool down the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 76
Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options Wall Color Off/Light Yellow/Pink/Light Green/ Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Auto Keystone On/Off 1. DISPLAY Keystone Position - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 77
/Português/ไทย/Polski/ Magyar/Hrvatski/Română/Norsk/ Dansk Suomi/Indonesia Projector Position Front Table/Rear Table/Rear Ceiling/Front Ceiling Menu On/Off Yes/No Background Color BenQ/Black/Blue/Purple Splash Screen BenQ/MyScreen/Black/Blue MyScreen Capture Yes/No PointDraw™ Single Pen - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 78
Normal/Economic Lamp Settings Reset lamp timer Equivalent lamp hour Change password Security Settings Change Security Settings Power on Lock Splash Screen On Lock Web Control Lock Baud Rate 2400/4800/9600/14400/19200/ 38400/57600/115200 Test Pattern On/Off Closed Caption Closed Caption - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 79
6. INFORMA TION FAQ-Image and Installation FAQ-Features and Service Current System Status Source Picture Mode Resolution Color System Equivalent Lamp Hour Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 80
of each menu • The default values listed in this manual, especially on pages 80-89, are for reference only. They may vary between the projectors due to the continuous improvement to the products. FUNCTION Wall Color Aspect Ratio Auto Keystone Keystone Position Phase DESCRIPTION Corrects - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 81
On will present the 3D images. When 3D Sync function is enabled, the projector will enter a special picture mode and the current picture mode adjusent will be disabled , enable this function to correct the problem. This function is only enabled when the input signal is PC@120Hz, Video and S- - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 82
2. PICTURE menu FUNCTION) DESCRIPTION Picture Mode Reference Mode Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 40 for details. Selects a picture mode that best suits your need - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 83
2. PICTURE menu FUNCTION Brilliant Color DESCRIPTION Adjusts white peaking while maintaining correct color presentation. See "Adjusting Brilliant Color" on page 42 for details. This function is only available when User 1/2 is selected. Color See "Selecting a Color Temperature" on page 42 for - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 84
reminder if timer is up. Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 34 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 16 for details. Menu display time - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 85
logo, Black, Blue, or Purple. Allows you to select which logo screen will display during projector Splash Screen start-up. Four options are available: BenQ logo, MyScreen, Black, or Blue. MyScreen Captures and stores the projected picture as My Screen. See "Creating your own startup screen" on - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 86
hour" on page 91 for details on how the total lamp hour is calculated. Change password You will be asked to enter the current password before changing to a new one. Security Settings Change Security Settings Power on Lock See "Securing the projector" on page 35 for details. Splash Screen On Lock - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 87
Closed Caption DESCRIPTION Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected image is free from distortion. Closed Caption Enable Activates the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 88
mode. Microphone Selecting On enables the function, and the microphone can be used even in standby mode Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 and MONITOR OUT jacks are correctly connected to devices. See - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 89
DESCRIPTION FAQ-Image and Installation FAQFeatures and Service Displays possible solutions to problems you may encounter. Source Shows the current , SECAM, or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Shows firmware version. Operation 89 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 90
to keep the lens and case clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 91
hour in Economic mode is calculated as 3/4 of that in Normal mode. That is, using the projector in Economic mode helps to extend the lamp hour by 1/3. To obtain the lamp hour information: 1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 2. Press to highlight - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 92
are for reference only. Please follow the actual on-screen instructions to prepare and replace the lamp. Status Message Install a new lamp for optimal performance. If the projector is normally run with Economic selected (see "Getting to know the lamp hour" on page 91), you may continue to operate - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 93
in a proper manner. • To assure optimal performance from the projector, it is recommended that you purchase a BenQ projector lamp for lamp replacement. 1. Turn the power off and disconnect the projector from the power outlet. If the lamp is hot, avoid burns by waiting for approximately 45 minutes - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 94
in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 6. Insert the - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 95
screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 12. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 96
Flashing Off Green Off Orange Flashing Off Lamp events Orange Flashing Off Off Off Thermal events Off Red Off Red Off Red Red Red Red Red Red Red Green Red Green Red Off Stand-by mode Off Powering up Off Normal operation 1. The projector needs 90 seconds to cool down as - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 97
from the projector. Replace the battery with new one. Remove the obstacle. Stand within 8 meters (26 feet) of the projector. The password is incorrect Cause Remedy You do not remember the password. Please see "Entering the password recall procedure" on page 36 for details. Troubleshooting 97 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 98
= 2.6 f = 6.9 mm (MW860USTi) F = 2.7 f = 5.45 mm Lamp (MP780 ST+) 185 W lamp (MW860USTi) 225 W lamp Electrical Power supply AC100-240V, (wireless) Screen control 12V trigger x 1 (0.5 A) USB B type x 1 (Supports firmware upgrade) Input terminals Computer input RGB input D-Sub 15-pin (female) x 2 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 99
Dimensions (MP780 ST+) 329 mm (W) x 137.2 mm (H) x 241.9 mm (D) 241.9 137.2 (MW860USTi) 330 mm (W) x 278 mm (H) x 154 mm (D) 278 154 329 62.5 77.4 330 62.5 77.5 Specifications 99 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 100
Ceiling mount installation 221.0 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 75.0 100.0 146.0 100.00 Unit: mm 82.50 116.00 107.7 62.5 163.7 328.0 115.1 129.1 100 Specifications - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 101
Timing chart Supported timing for PC input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1024 x 576 1024 x 600 1024 59.978 60.000 66.667 74.546 75.020 75.060 119.518 119.854 119.989 120.000 *Supported timing for 3D function. Pixel Frequency (MHz) 28.322 25.175 31.500 36.000 40.000 50.000 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 102
Supported timing for HDMI input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1280 x 960 1440 x 900 1400 x 1050 1600 x 1200 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 103
60.00 50.00 60.00 50.00 60.00 50.00 Displaying a 1080i@60Hz or 1080i@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC* PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal Frequency (kHz) 15.73 15.63 15 - BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector | MW860USTi User Manual - Page 104
BenQ's written instructions, especially the ambient humidity must be inbetween 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ *DLP,
Digital Projector
User Manual
MP780 ST+/MW860USTi