BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector MW860USTi User Manual - Page 47
Utilizing FAQ function, Locking control keys
View all BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Utilizing FAQ function The INFORMATION menu contains possible solutions to problems encountered by users regarding image quality, installation, special feature operation and service information. To get the FAQ information: 1. Press on the remote control or press MENU/EXIT to open the OSD menu and press / to highlight the INFORMATION menu. 2. Press to highlight FAQ-Image and Installation or FAQ-Features and Service based on the information you want to know. 3. Press MODE/ENTER. 4. Press / to select a problem and press MODE/ENTER for possible solutions. 5. Press MENU/EXIT to exit the OSD. Locking control keys With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except Power. 1. Press / on the projector or remote control or go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by pressing / on the projector or remote control. 2. A confirmation message displays. Select Yes to confirm. To release panel key lock, press and hold / for 3 seconds on the projector or remote control. You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock and press / to select Off. • Keys on the remote control are still in use when panel key lock is enabled. • If you press Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. Operation 47