BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector MW860USTi User Manual - Page 69
SYSTEM SETUP, Advanced, Network, Settings, MODE/ENTER, Remote Desktop, ENTER, Account, Password
View all BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
3. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Network Settings menu. Press MODE/ENTER. 4. Highlight Remote Desktop and press MODE/ ENTER. 5. Enter the Account and Password the same as step 1. 6. Highlight Connect and press MODE/ENTER to connect the selected PC. 7. Connect USB keyboard or mouse to control the host PC's desktop through the projector. • Remote Desktop Control does not support PC Standby mode. • Remote Desktop Control only supports LAN source so the projector source is fixed on LAN. Operation 69
Operation
69
3.
Open the OSD menu and go to the
SYSTEM SETUP
:
Advanced
>
Network
Settings
menu. Press
MODE/ENTER
.
4.
Highlight
Remote Desktop
and press
MODE/
ENTER
.
5.
Enter the
Account
and
Password
the same as
step 1.
6.
Highlight
Connect
and press
MODE/ENTER
to connect the selected PC.
7.
Connect USB keyboard or mouse to control the
host PC’s desktop through the projector.
•
Remote Desktop Control does not support PC Standby mode.
•
Remote Desktop Control only supports LAN source so the projector source is fixed on
LAN.