BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector MW860USTi User Manual - Page 44
Creating your own startup screen
View all BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Creating your own startup screen In addition to selecting the projector preset startup screen from among BenQ logo, Black or Blue screen, you can make your own startup screen that is an image projected from your computer or video source. 1. Project the image you want to use as your startup screen from either a computer or video source. 2. Press CAPTURE on the remote control or go to the SYSTEM SETUP: Basic > MyScreen menu, press MODE/ENTER. 3. A confirmation message displays. Press CAPTURE or MODE/ENTER again. 4. The message 'Screen Capturing...' displays while the projector is processing the image. Please wait. 5. If the action is successful, you see the message 'Captured Succeeded' on the screen. The captured image is saved as MyScreen. 6. To view the captured image displayed as the startup screen, set MyScreen in the SYSTEM SETUP: Basic > Splash Screen menu and restart the projector. In the unlikely event, the capturing action failed. If so, change your target image. 44 Operation