BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector MW860USTi User Manual - Page 88
Standby, Settings, Network, Reset All, SYSTEM SETUP: Advanced menu, Microphone, Monitor Out, Wired LAN
View all BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
5. SYSTEM SETUP: Advanced menu FUNCTION Standby Settings Network Settings Reset All Settings DESCRIPTION Network Selecting On enables the function, and the projector can be monitored or controlled over a network when it is in standby mode. Microphone Selecting On enables the function, and the microphone can be used even in standby mode Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 and MONITOR OUT jacks are correctly connected to devices. See "Connecting a monitor" on page 25 for how to make the connection. Enabling this function slightly increases the standby power consumption. The Monitor Out only works when an appropriate D-Sub input is made to the COMPUTER 1 jack. Wired LAN See "Controlling the projector through a LAN environment" on page 50 for details. Wireless LAN See "Controlling the projector through a LAN environment" on page 50 for details. Remote Desktop See "Displaying image through Q Presenter" on page 60 for details. Projection Log in code See "Using the Projection Login Code" on page 64 for details. Returns all settings to the factory preset values. The following settings will still remain: Position, Phase, H. Size, User 1, User 2, Language, Projector Position, High Altitude Mode, Security Settings, Baud Rate. 88 Operation