BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector MW860USTi User Manual - Page 51
Controlling the projector remotely through a web, browser, Enter. For example
View all BenQ BenQ MW860USTi Ultra Short-Throw 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Infrastructure mode connection, you need to select the projector's SSID which you want to connect. See "Displaying image through Q Presenter" on page 60 for details. 4. Use your computer's wireless connection utility to connect the network. If WEP Key is set in the projector, the user must enter the password of WEP Key to connect the network. Controlling the projector remotely through a web browser Once you have configured the LAN settings, you can find the IP address for the projector in the bottom of the network screen. You can use any computer that is on the same local area network to control the projector. 1. Enter the address of the projector in the address bar of your browser and press Enter. For example: http://10.60.7.31 2. The BenQ remote network operation page opens. • The web page control supports IE version 7.0 or higher. Operation 51