Bernina 740 Manual - Page 12
Bernina 740 Manual
View all Bernina 740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
A more perfect stitch is obtained if the under thread is thiDen somewhat finer than the one used for upper thread. The red from which the winding has to be performed is placed onto one of the two reel. pin* 35. In order to prevent the whole machine from running needlessly when winding, turn with your right hand the handwheel release screw 16 as far as towards you, and at the same time holding the handwheel 13 firmly with your left hand. Place the bobbin 34 onto the bobbin shaft 36 protruding from the hinged cover. Now the threading et lakes place as follows: First lead the thread from the reel round the winder pretension device 37, so that the thread is creasing, and from there over the thread guide bolt 32 to thread bobbin 34. Here ti., the thread should wind In clockwise direction on O. bobbin. Now push lever 33 against the bobbin, tn.' it gets engaged. Then the motor can be started by a slight pressun the knee lever, respectively on the pedal starter. D • mechanism being still at rest, Operate the macho,. until the bobbin is filled, whereupon the winder u II stop automatically. After the filled bobbin has been taken off, lever 37 with winder pretension (hake should be turned In again and hinged cover 14 ran be returned to its starting position. Hetighten handwheel release screw 16 once more. 11